Panasonic KXDT333   Phone Logo

Related Topics:

A
Anonymous Posted on Jun 25, 2014

Kx-dt333 line not assigned - Panasonic KXDT333 Phone

5 Related Answers

cnavarro

Carl Navarro

  • 2460 Answers
  • Posted on Sep 25, 2010

SOURCE: how do I change name

From the phone connected to Jack 01 or the authorized phone (generally 101) press PROG and dial **1234 Dial 004 and ENTER and dial the ext number of the phone you want to change Use the keypad to enter the name (you have Upper and Lowercase letters) and the arrow key to step to the next character. When you finish, press STORE.

Carl

Ad
cnavarro

Carl Navarro

  • 2460 Answers
  • Posted on Dec 22, 2010

SOURCE: need to change the answering machine message on my

I dial 500 and follow the prompts.

Carl

cnavarro

Carl Navarro

  • 2460 Answers
  • Posted on Mar 13, 2011

SOURCE: I have a PANASONIC KX-DT333

I don't know about a handset, since mine doesn't have a dial, but the phone underneath the handset has to have a button programmed with the lines you use in order to work. By default, the system has some number of Single CO buttons assigned in numerical order from the bottom to the top and left to right. You can test that by pressing PROGRAM, press the line buttons in sequence, and reading the display. They will say CO 001, 002, 003 etc. If they don't, you can always dial 0 001 store, 0 002 store etc and get the line appearance back.

This solution works in a small system and is very basic. It doesn't take a T1/E1/PRI or group CO buttons. into consideration. Such a solution is beyond the scope of a free forum.

Carl

cnavarro

Carl Navarro

  • 2460 Answers
  • Posted on Jun 09, 2011

SOURCE: I have a kx-tda30 unit

A couple of things come to mind, but what happens when you press PROG and the line 1 button on an idle phone? If it doesn't say Single Line-001, that could be something. Dial 0 01 and press ENTER. Now CO1 is back under that button.

The other items deal with line preference incoming so save it for later.

Carl

cnavarro

Carl Navarro

  • 2460 Answers
  • Posted on Jun 17, 2011

SOURCE: Hi I would like to

To what? There's a complete table in the Operations Manual (OM) or can you remember 0, 1 and 2? 0 assigns single lines....don't touch them. 1 plus ext assigns intercom numbers, and 2+access code and number is used to set personal speed dials (you also have 30 under the touch pad). Other commands set up Transfer to VM, VM record, CID display, Headset mode, etc. etc.

If you don't have a copy of the OM, here's one. Please rate this solution because as soon as you do, or after a short time, this manual will be gone. http://public.carl.airpost.net/misc/200_TDA_OM_10-11.pdf

Carl

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Panasonic KX-DT333: The switchboard/directory isn't showing 'busy' lines lit up red after recently re-programming phones.

If the busy lines on your Panasonic KX-DT333 switchboard/directory are not lighting up in red after re-programming the phones, it's possible that the programming settings related to the busy line indication were inadvertently modified. Here are a few steps you can try to bring back the feature:
  1. Verify quick dial settings: Double-check the quick dial settings on the phones that are not displaying the busy lines. Make sure that the busy line appearance is correctly assigned to the corresponding quick dial buttons. You can refer to the phone's user manual or programming guide for instructions on how to assign busy line appearances.
  2. Check programming options: Access the programming mode of your Panasonic KX-DT333 system. Look for settings related to busy line indication or busy lamp fields (BLF). Ensure that the appropriate options are enabled or configured to display the busy lines as red.
  3. Restart or reset the system: Try restarting the switchboard or resetting it to its factory default settings. This can help restore any configuration settings that might have been changed during the re-programming process. Be aware that resetting the system will erase all previous programming, so it's crucial to have a backup of your settings if necessary.
  4. Consult the user manual or contact support: If you're still experiencing difficulties, refer to the user manual or programming guide for your Panasonic KX-DT333 system. These resources should provide detailed instructions on how to configure the busy line indication feature. If needed, you can also reach out to Panasonic customer support for further assistance.
Remember to exercise caution when accessing the programming mode or making changes to your system's settings. If you're unsure about any steps or if you're uncomfortable with the process, it's advisable to consult a professional technician or contact Panasonic support for guidance.
0helpful
1answer

How to make a recorded greeting on panasonic kx-dt333 phone system.

http://www.ek-king.com.tw/KX-DT333.pdf
http://eng-ca.faq.panasonic.com/app/answers/detail/a_id/20743/~/how-do-i-record-my-own-greeting-message-for-my-answering-machine%3F
0helpful
1answer

How to edit speed dial feature KX-DT333

To Program:
Lift handset. Press * 3 0 , then enter the desired 2-digit code (00-09), enter the line access code (generally “9”) followed by the telephone number, then #.

To Use:
Lift handset. Press AUTO DIAL/STORE * plus the 2-digit code (00-09).

To Use System speed Dial:
Lift handset. Press AUTO DIAL/STORE plus 3-digit (000 - 999)


The User Guide can be found at the link below. Hopefully this helps.

http://www.manualslib.com/manual/853264/Panasonic-Kx-Dt333.html
0helpful
1answer

How to turn on voicemail feature when busy on other line

Try out this PDF it's a Manual for that model
https://www.voicesonic.com/panasonic/manuals/KX-DT300/KX-DT333-343-346_Quick_Refernce_Guide.pdf
0helpful
1answer

Hi I would like to change the Flexible Buttons on our Panosonic KX-DT333 can you please help? Thanks

To what? There's a complete table in the Operations Manual (OM) or can you remember 0, 1 and 2? 0 assigns single lines....don't touch them. 1 plus ext assigns intercom numbers, and 2+access code and number is used to set personal speed dials (you also have 30 under the touch pad). Other commands set up Transfer to VM, VM record, CID display, Headset mode, etc. etc.

If you don't have a copy of the OM, here's one. Please rate this solution because as soon as you do, or after a short time, this manual will be gone. http://public.carl.airpost.net/misc/200_TDA_OM_10-11.pdf

Carl
0helpful
1answer

I have a kx-tda30 unit and one of the phones a kx-dt333 is having issues with line one. when answering it i have to press the intercom button when all other units are assigned to co.1 what i would like to...

A couple of things come to mind, but what happens when you press PROG and the line 1 button on an idle phone? If it doesn't say Single Line-001, that could be something. Dial 0 01 and press ENTER. Now CO1 is back under that button.

The other items deal with line preference incoming so save it for later.

Carl
0helpful
2answers

How do I setup my voicemail to my KXDT333 on a SECOND line (with a different voicemail if possible)?

Hello,

Dial your extension. Wait for the greeting to say that you are at your voice mailbox. This is also the "Quick Voice Mail Tutorial Set Up."

Follow the instructions provided in the tutorial. You will be asked to enter your name (or company name), password and greeting. Write down the password and keep it in a safe place.
Record other greetings, if needed. After the tutorial, you have an option to add different messages for different situations. Press "311" to change your general greeting. Use "312" to record a message for when the line is busy. Dial "315" to record a temporary greeting for when you are away for an extended period of time, such as vacation.

In addition, visit this link below and read the information on page 9. I think it will be of help.

http://service.us.panasonic.com/OPERMANPDF/KXDT333.PDF

Good luck.
0helpful
1answer

I have a PANASONIC KX-DT333 with several handsets. On all handsets we cannot dial out . The message LINE NOT ASSIGNED comes up on all handsets.Also we have had no incoming calls. Callers are all getting a...

I don't know about a handset, since mine doesn't have a dial, but the phone underneath the handset has to have a button programmed with the lines you use in order to work. By default, the system has some number of Single CO buttons assigned in numerical order from the bottom to the top and left to right. You can test that by pressing PROGRAM, press the line buttons in sequence, and reading the display. They will say CO 001, 002, 003 etc. If they don't, you can always dial 0 001 store, 0 002 store etc and get the line appearance back.

This solution works in a small system and is very basic. It doesn't take a T1/E1/PRI or group CO buttons. into consideration. Such a solution is beyond the scope of a free forum.

Carl
Not finding what you are looking for?

336 views

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phones Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...