How do I resolve a repeating image (not ghosting) on printed side of page?

Hello,

Change the cleaning blade or/and drum. First you check how many copies have this parts (you have to enter in service mode to check counters). If you don't know how to change this parts, call service technician.

All the best !

Hi,
It could be the transfer belt that is not cleaning properly, causing a ghost image.

Perform fuser cleaning procedure. If not helpful, replace the hot fuser roller. When worn out it collects toner and may lead to repetitive image.

Solutions - Brother International - Frequently Asked Questions

www.brother-usa.com/FAQs/Solution.aspx?...

Brother IndustriesThe text and images on my printed documents are ghosting or double printing. ...checks, or other media can cause reprinting or ghosting on the page. ... NOTE: This cleaning process may have to be repeated several times to remove certain ... Remove the toner cartridge from the drum by holding down the green lock lever ...Missing: intellifax ‎4100e

[PDF]FAX-4100e FAX-4750e FAX-5750e - Brother

https://www.brother-usa.com/.../UM_IntelliFax_4100e_E... Brother IndustriesYou can download the latest software documents ... Paper Cassette #2 (Option for FAX-4100e and FAX-4750e) .... repair or replace the Machine and/or ..... 4 Double-click the icon for the documentation you want to read. ... To return to the main page, click Back-OR-If you have finished your setup, ..... Repeating Letters .

Solutions - Brother International - Frequently Asked Questions

Run a half test. While printing a few pages, open the cover, pull out the toner and look down at the paper. If you see the ghost images replace the toner. If you don't see the ghost images, replace the fuser.

Hello,

You have a worn image drum. The drum is the part of the printer that the print image is created on before it transfers the toner to the paper. This part is coated with a very thin layer of Teflon so the toner does not stick. When it gets worn the toner starts to stick and that produces the shadow or ghost image approximately 3 inches down the page because the diameter of the drum roller is 3 inches. You will need to get the part DR-350, Office Depot has them as well as many places on the internet.

I hope this helps, if so please rate our solution.

Buddy
Corporate Computer

i would say ghost image is more likelly your imaging drum.

some printers have the imaging drum built into the cartridge some have it separate.

i would say try another cartridge

also don't trust remanufactured cartridges if you are concerned with print quality.

Is it a ghost of the image or just a repeating defect? In the menu, there is a repeating defect information page that you can print out. Depending on the spacing of the defect, you can determine which component it is.

This can be caused by one of two things.

1. faulty wiper blade on your toner so that the previous image in not being wiped off the drum.
2. worn fuser sleve.

To work out which it is you will need to do a half stop test: print off a normal document then when it is about half way through the printer ( unfortunatly you may have to repeat this to get the timing right) open the front cover. remove the toner cartridge. if you can see the ghosting on the page the it is the toner. if its not there then its a new fuser. to save on money and if your confident enouh you may be able to just chane the fuser sleve depending on the state of the fuser on a whole.

hope this helps
feel free to email me if you have any other questions:

[email protected]

Is it from the most recently printed page, or is it the same image avery time regardless of what you print? It sounds like your drum or roller (I'm not sure about the exqact term in english) might be the issue. Have you somehow managed to "force" a printing without paper in the printer?