Replaced toner in a Canon image runner 2200 copy comes out blank

check drum cleaning blade.

Check copy glass, drum unit, fixing film.

Hello sir; I would like you to check the charge corona wire inside the drum cartridge or you just replace a new drum cartridge, before you change also check the discharge corona wire at the bottom inside the machine.

didnt it come with a manual..if not look one up online

check the drum

guessing its the wrong print driver go to imagerunner ,com and look for different driver

Most likely your drum unit is worn out. If it reaches the yield of 50k or more, it starts to develop grooves in the drum and toner gets stuck in the groove and is applied to your pages. If you have a service company, they can change it for you. We sell the drum for $220.

Hi Willow. If you purchase a genuine drum fom Canon the instruction are in the box. If you have bought a drum from Katun that may not be the case. My email address is [email protected]. I can help you and its pretty easy with a little guidance from me or some one who does this stuff. Let me know if you have the benefit of the instructions as that would be best for you since it has illustrations which are far more helpful than the written word that I would provide you with. No matter what I will gladly help. ...........Spinal

error code eo-20 on canon pc740 without replacing drum/toner unit

hi im jules_09.the opc drum of canon is not needed to be polish,they are sensitive to any form of polishing materials,but if the drum is not scratch adjust the voltage on your exposure lamp in the program.if its still light somrthings wrong with your developer