2004 Ford Freestar Logo

Related Topics:

Posted on Mar 13, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Let our Experts solve your "when at idel rpms quikly drop and car stalls" Problem

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Master 463 Answers
  • Posted on Mar 13, 2009
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Sep 14, 2007
Answers
463
Questions
0
Helped
247153
Points
1336

Almost always a vacuum leak. Especially suspect is the vacuum "boss" located near the back of the engine. Make sure all those little hoses are on their nipples, and that the hoses themselves are not cracked, etc.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

05' Nissan Altima 2.5s High rpms ruff idel after sensors changed

-scan for trouble codes -check air filter --map sensor [clean if dirty ] vacuum leak --cat converter--fuel filter
0helpful
1answer

02 honda accord wont idel if does be real rough then stall, replaced dist. plugs and wires

Check your EGR valve, see if it's stuck open. Next look for vacuum leaks, then check cam timing. Check engine light on? If so, get the codes.
0helpful
1answer

Van stalls at low rpms but not all the time ?

If old van you have a carb. Jet plugged with trash. If you have fuel injection or throttle body injection, one or more of your jets is partially blocked. Try a cleaner added to your fuel tank. May end up replacing the part/s
46helpful
3answers

2004 Envoy xuv 6 cyl stalls with A/C on at idle

2004 Envoy xuv 6 cyl when I turn on the A/C the truck stalls but as long as I keep my foot on the gas it will continue to run
0helpful
1answer

Engine and tcs light on car stalling and rpms

p0134 is oxygen sensor fault code
p0717 is turbine shaft speed sensor (no signal) fault code
0helpful
1answer

Some times my 1984 ford f150 idels fine when its in park(some times)but when i put it in drive or reverse idel drops about 500 or so rpm sputters for a little bit and then dies. Some times it runs fine...

In general, yes. This is a carb tuning issue. Another possibility is a vacuum leak somewhere, but most likely, it's a carb issue. You'll typically see your rpm drop a bit when you put it in gear, but that it sometimes stalls out points to a carb issue.
0helpful
1answer

The idel revs to 3000 rpms and holds there

there is a problem then because that is not suspose to happen call a tow truck and call your company
0helpful
2answers

Jeep dies when you let of gas

Check/replace the Idle Air Control Valve, located on the intake manifold. It is likely sticking or otherwise not operating correctly.

Also, check for vacuum leaks.
1helpful
1answer
0helpful
3answers

MOTER STALLS WHEN AT RUNNING TEMP AND IDEL

its vapor locking try leaving the fuel cap a little lose!!!!
Not finding what you are looking for?

150 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...