Bluetooth pairing codes - Radio Communications

The pairing code will be displayed on the screen of the device you are trying to pair it with. Simply switch on the keyboard. It should go into pairing mode looking for a device. Go into the bluetooth option on your device and you should see the "HYPE" device listed. Choose it and then enter the pairing code that displays on the screen of your device. That should be all there is to it.

pair the phone with another bluetooth phone by putting the same code on other bluetooth mobile setexample 0000 or 1234 or any one else but this code must be put on the other set also for pairing
0000 on mobile 1 ----------pairing----------------0000 on mobile 2 (sucessfully paired)
0000 on mobile 1------------pairing---------------1234 on mobile 2(error can't be paired)

Hi,

As you pair the bluetooth in your computer and a bluetooth device, it gives you a pairing code, only if needed so, like the keyboard. The pairing code is seen in the computer, and is generated by the computer as you click on "create a pairing code". For other devices, a pairing code is NOT required.

Thank you for visiting FixYa!

Hi, to be sure if the blue tooth wll be compactible with Samsung Gusto, you will need to use the below instructions first after trying out the instruction and still does not work,that means it's not compactible with it.

instruction:

Read the owners manual for your bluetooth device. You will need to find the code to pair your headset to your phone. This code is usually 0000 (those are zeroes) but verify before you proceed.


Enter your bluetooth option on your cell phone. These can be found in your menu under "bluetooth," "connections," "settings," or something similar.


Turn on your bluetooth headset and put it in pairing mode. Pairing mode means the bluetooth is ready to be found by your cell phone. To pair your headset, follow the owners manual for your specific bluetooth model.


Select "add device" or "search for new device" from your cell phone. Your cell phone will then search for your bluetooth. Once it is found, or discovered, you will need to enter the pairing code (most likely 0000, check your manual to verify).


Select "connect" to finalize the connection if the bluetooth headset didn't connect automatically after the pairing code was entered. Make a test call with your bluetooth in your ear to ensure it is connected properly.

Good luck..

The reason is you need a four digit code in order to pair your Bluetooth to your phone. Also, your phone has to be 'Able to be found', ie, set your Bluetooth settings on your phone, so that the phone is in 'Discoverable Mode' and ensure the Bluetooth setting itself is also turned on.

Once your phone is Bluetooth discoverable, try and pair the devices again. Your phone will find your headset and ask if you would like to pair the two devices. Obviously, select Yes/Pair and it will then require a 4 digit code for authentication. With Jabra the code is always "0000" (4 zero's). Once you enter the 4 zero's, the two units will then pair successfully.

Let me know if you require further assistance.

Hi, Read the owners manual for your bluetooth device. You will need to find the code to pair your headset to your phone. This code is usually 0000 (those are zeroes) but verify before you proceed.


Enter your bluetooth option on your cell phone. These can be found in your menu under "bluetooth," "connections," "settings," or something similar.


Turn on your bluetooth headset and put it in pairing mode. Pairing mode means the bluetooth is ready to be found by your cell phone. To pair your headset, follow the owners manual for your specific bluetooth model.


Select "add device" or "search for new device" from your cell phone. Your cell phone will then search for your bluetooth. Once it is found, or discovered, you will need to enter the pairing code (most likely 0000, check your manual to verify).


Select "connect" to finalize the connection if the bluetooth headset didn't connect automatically after the pairing code was entered. Make a test call with your bluetooth in your ear to ensure it is connected properly.

I do not know what the actual pairing code is, but these websites may guide you in how to pair bluetooth devices together.

bluetooth-technology/general-bluetooth-information/bluetooth-pairing.html">http://www.bluetomorrow.com/about-bluetooth-technology/general-bluetooth-information/bluetooth-pairing.html

http://www.askdavetaylor.com/how_do_i_pair_my_motorola_slvr_with_my_moto_h700_bluetooth_headset.html

yes the default bluetooth code is 0000

pairing code or pass word for my plantronics220 bluetooth ear piece

Thanks, the code 0000 for the T305 worked.