How to scan using canon pixma mp150

SOURCE: how do I scan an image from canon pixma mp150

Acquire Text The following instructions will give you the basic instructions to acquire text from a scanned document in Office Word 2007 using OmniPage SE.

1. Ensure the Canon scanner driver and OmniPage SE are installed and that your scanner has been setup.
   
   Note: If OmniPage SE is not installed, the required Add-in for Office Word 2007 will not be installed
   
2. Place the document(s) to scan on the platen or on the Automatic Document Feeder (ADF) (if applicable).
   
   
3. Open Office Word 2007.
   
   
4. From the ribbon menu, select the 'Add-Ins' tab.
   
   
   
   
5. In the Add-Ins tab, click 'OmniPage' and then select 'Acquire Text Settings (OmniPage SE)'.
   The Options window will open.
   
   
   
   
6. On the Direct OCR tab, click the 'Image Source' drop-down to select 'Scan'.
   
   
   
   
7. Confirm 'Scan' is shown in Image Source section and then click 'OK'.
   The Options window will close and you'll return to Office Word 2007.
   
   
   
8. Click 'OmniPage' and select 'Acquire Text (OmniPage SE)' to scan your document.
   
   
   
   
9. After the document(s) is scanned, make corrections to the text items as appropriate.