Nikon D70 Metz 54MZ-4 , SCA 3402 ... will not fire on a Nikon D70s in any mode..

Yes, if you buy the Nikon AS-15.

[email protected]

Get the Nikon AS-15. [email protected]

Will a Metz 45 CL 4 FLASH a SCA 346/2 AFR module work onTTL mode for a Nikon D 70 & D 40X DSLR cameras

Not sure what S6 pro is, but if the flash doesn't fire in TTL then the flash is not support the type of TTL in the camera. I had the same problem with Nikon flashes on Nikon bodies. Perhaps you need a newer SCA adapter? Please go on http://www.metz.de/en/photo-electronics/sca-adapter/archive.html to check which adapter you need

Yes. Make sure you specify Nikon when you order/purchase the unit.

Metz in Germany advises Models CT45-1 with Serial No's 53400 or less have High Voltage triggers and must not be used on NIKON Digital Cameras Models D70 ,D80, D90 etc.and will damage Flash and even Cameras. according to a email received today. 21/09/2009 Models CT45-4 and 45CL -4 ore ok.
Michael T

You can get a free firmware upgrade for the SCA 3402 from:

Jhon Salazar
Repair Department
Bogen Imaging, Inc.
565 E. Crescent Ave
Ramsey, NJ 07446
201.818.9500 x 245
[email protected]

They handle Metz Flashes in the US

The 60CT-4 was not made for digital cameras.
It does TTL on film not on CMOS or CCD sensor.

Alexander
[email protected]

What camera to what flash?

[email protected]

It is likely the capacitor in the battery pack. If they are not powered up every month, they dry out resulting in long power up and recycle times. You'll need to get it replaced to rejuvenate your 60 CT-4 to its original spec.