I have a problem to use with my printer server DPR1260. I successfully connected DPR-1260 and printed documents under wireless environment. But, DPR-1260 suddenly disapears in "my network place" and I cannot connect it, after around 10 minute use. And the LED that displays the connected printer is off.
DPR-1260 works again when I unplug then plug the power connector. And it is gone after around 10 minute. (It looks like the DPR-1260 is not running correctly.) Is there any soultion for this problem?
This kind of problem occurs in dlink router sometimes & after some time router stop responding after 10 -15 min & once u reboot the router it again start work for a while. the best solution to this problem is to reset the router back to its factory defualt settings u can do this by press the reset button on the back on the router ( it looks like a small hole u have to use a pin for press that button) once u have reset the router to factory default settings just reconfig the router & i am sure it will start working fine in case u still face the same problem just contact D-link or send me the details about the problem & the physical setup of ur router & printer etc
1,222 views
Usually answered in minutes!
I have the same problem with my DPR-1260. Latest firmware installed. The unit works fine for a while using the wired cable and then the printer icons suddenly disappear and the unit stops functioning. To get it to work again I have to power cycle the unit.
this i have done over and over. resetting it and reconfiguring but the reason i have to do this all the time is every time there's a disconnection from the power source, the print server loses it's configurations. both th networkand wireless configurations are changed back to the default. what can i do about this situation? i have to reconfigure all the time and it's not always easy to access the upnp icons of the router in my network places. please help
richard
×