Dp-g321 does it work with vista

Laserjet 1020 is a host-based (WIN) printer. Won't work on DP-G321.
Connect using USB to a PC and share it.

You need to use the SSID of the wireless router on the print server. Any wireless security applied to the router must also be applied to the print server. Otherwise you have two seperate wireless networks.

check in page setup plz

Yes, but it run like 64 bit, because of the other devices.

Call Printer support phone number 1-888-687-4491 USA Toll-free and find instant support.

I have one of theses D-Link PD-301U. It does NOT support a printer like yours. According to D-Link's Web site, here are the HP Laser printers it supports (note the P1008 is NOT in the list):

LaserJet

1200

1500 (USB 2.0)

2200

2200D

http://support.dlink.com/faq/view.asp?prod_id=2135&question=DP-300U%20/%20DP-301P+%20/%20DP-301U%20/%20DP-311U%20/%20DP-G310%20/%20DP-G321

I have one of theses D-Link PD-301U. It soes NOT support most All-in-one printers like yours. According to D-Link's Web site, here are the HP Laser printers it supports (note the P1008 is NOT in the list):

LaserJet

1200

1500 (USB 2.0)

2200

2200D

http://support.dlink.com/faq/view.asp?prod_id=2135&question=DP-300U%20/%20DP-301P+%20/%20DP-301U%20/%20DP-311U%20/%20DP-G310%20/%20DP-G321

Hello Kawena66,
There may be an ip conflict as the error suggest.
what is the ip address on your XP system?

Default IP is 192.168.0.10
There is no default password.

BTW-did you try that yet? No password that is....

Jeff

I am currently using this print server with the HP Laserjet 1100 on the parallel port and it works flawlessly.