How can I make the time on my extension display in 24 hr format (Panasonc KX-DT343)?

just do a search for the owners manual ie kx-dt343 manual.pdf

Have you had a look in the menu and look for display backlight and set it to off that should solve that little problem.

This depends what voicemail you have, SVM OR TVM. and you need to know what group rings in each mode SVM day *47 (voicemail extension number) (PIN number) *38801 record STORE NIGHT *47 (voicemail extension number) (PIN number) *38811 record STORE TVM voicemail extension number (500 or 200) #6* (ringing group number) option 3 then 1 then 1 follow the prompts

Perhaps you are trying to set up speed dialing.
Right?

From the phone connected to extension 101, press PROG and dial **1234 If the display responds Sys Prog #, then dial 004 and enter. It's the menu to assign names to extensions. You can sort of follow along and use the arrows, the keypad, and the ENTER and SAVE buttons to step through the names and change them.

Carl

Which system do you have? Below are the Panasonic systems. Be sure you find yours.......


Panasonic XDP 824/1232
All programming is done at ext. 101
1) Press the program button, followed by *#1234
2) Dial 000, then follow the prompts on the LCD
KX-T308, KX-T616

1. Use phone with intercom number 11. It will change the time for all phones.
2. Keep handset down and press INTERCOM button.
3. Dial 77.
4. Dial the hour, with two digits (e.g. 03 for 3 o'clock).
5. Dial the minutes, with two digits (e.g. 07 if it is now 7 minutes after the hour).
6. Dial 0 for AM or 1 for PM.
7. Press #.
8. Press SP-PHONE

Panasonic KXT Series Telephone System
Setting the time must be completed from an LCD Display phone at Extension 11, using the telephone keypad. This system type requires "Easa-phone" series or a 7000 series model telephone (the model number is listed on the bottom of the phone) that has one or more small switches located at the rear of the phone. Digital "XDP" phones can not be used on this system type!
To set the time:

• Lift the handset or press "SP-Phone" button on Extension 11.
  
• Dial "77"
  
• Enter the hour with 2 digits. (01 through 12)
  
• Enter the minute with 2 digits. (00 through 59)
  
• Dial (0) for AM or (1) for PM.
  
• Press the "#"
  
• Wait for confirmation tone. (Instantly after pressing the # button, new time counting will start).
  

KX-TA624

1. Use phone with intercom number 101. It will change the time for all phones.
2. Move MEMORY switch on rear from SET to PROGRAM.
3. Dial *#1234
4. Dial 000
5. Press NEXT ("Sp-phone")
6. Press Right Arrow ("FWD/DND") four times until you see the time displayed
7. Change the hour with the keypad
8. Press Right Arrow ("FWD/DND") to reach the minutes field
9. Change minutes with the keypad, if necessary
10. Press AUTO DIAL/STORE
11. Press HOLD
12. Move MEMORY switch on rear from PROGRAM to SET.

KX-TAW848

1. Use phone with intercom number 101. It will change the time for all phones.
2. Press PROGRAM (or PAUSE, if you don't have a PROGRAM button.)
3. Dial programming access code (probably *#1234)
4. Press NEXT (SP-PHONE, if you are not using the programming template).
5. You'll see "Date & Time Set" on your phone's display
6. Press STORE
7. Press NEXT to see hours and minutes.
8. Use your keypad to change the hour
9. Press STORE.
10. Press HOLD.
11. Press PROGRAM

KX-T123211D

1. Use phone with intercom number 101 (probably the receptionist's phone). It will change the time for all phones.
2. Move MEMORY switch on back of that phone to PROGRAM.
3. Keep handset down and press 0 on touch-tone dial.
4. Dial year with two digits (e.g. 97 for 1997).
5. Dial month with two digits (e.g. 01 for January).
6. Dial date with two digits (e.g. 03 if today is the third day of the month).
7. Dial day with one digit (1 for Monday, 2 for Tuesday, 3 for Wednesday, 4 for Thursday, 5 for Friday, 6 for Saturday, 0 for Sunday).
8. Dial hour with two digits (i.e. 01 for 1 o'clock).
9. Dial minutes with two digits (i.e. 07 for 7 minutes).
10. Dial 0 for AM, or 1 for PM
11. Press either AUTO DIAL/STORE or AUTO/MEMORY, depending on your phone.
12. Move MEMORY switch on back of phone to SET.
    

Panasonic DBS 824, 40, 72 & 96
- From the Attendant's display phone.

1. Press "On/Off"
2. Press "Prog"
3. Press " ##"
4. Press "FF1 key"
5. Dial 1#, 2#
6. Dial the time in 24 hr format.
7. Press #
8. Press "On/Off"

- From any display phone in the system.

1. Press "On/Off"
2. #98 + Password
3. Press "Prog"
4. Press " ##"
5. Press "FF1 key"
6. Dial 1#, 2#
7. Dial the time in 24 hr format.
8. Press #
9. Press "On/Off"

Panasonic DBS 576 & 576 HD
From any display phone in the system;

1. Press On/Off
2. Press "Prog"
3. Press " * * "
4. Dial the " Password"
5. Press "FF8"
6. Dial 81001
7. Dial in new time in 24 hr format.
8. Press Hold and then "On/Off"

Which system. See below. BUT make sure you find your system first....


Panasonic XDP 824/1232
All programming is done at ext. 101
1) Press the program button, followed by *#1234
2) Dial 000, then follow the prompts on the LCD
KX-T308, KX-T616

1. Use phone with intercom number 11. It will change the time for all phones.
2. Keep handset down and press INTERCOM button.
3. Dial 77.
4. Dial the hour, with two digits (e.g. 03 for 3 o'clock).
5. Dial the minutes, with two digits (e.g. 07 if it is now 7 minutes after the hour).
6. Dial 0 for AM or 1 for PM.
7. Press #.
8. Press SP-PHONE

Panasonic KXT Series Telephone System
Setting the time must be completed from an LCD Display phone at Extension 11, using the telephone keypad. This system type requires "Easa-phone" series or a 7000 series model telephone (the model number is listed on the bottom of the phone) that has one or more small switches located at the rear of the phone. Digital "XDP" phones can not be used on this system type!
To set the time:

• Lift the handset or press "SP-Phone" button on Extension 11.
  
• Dial "77"
  
• Enter the hour with 2 digits. (01 through 12)
  
• Enter the minute with 2 digits. (00 through 59)
  
• Dial (0) for AM or (1) for PM.
  
• Press the "#"
  
• Wait for confirmation tone. (Instantly after pressing the # button, new time counting will start).
  

KX-TA624

1. Use phone with intercom number 101. It will change the time for all phones.
2. Move MEMORY switch on rear from SET to PROGRAM.
3. Dial *#1234
4. Dial 000
5. Press NEXT ("Sp-phone")
6. Press Right Arrow ("FWD/DND") four times until you see the time displayed
7. Change the hour with the keypad
8. Press Right Arrow ("FWD/DND") to reach the minutes field
9. Change minutes with the keypad, if necessary
10. Press AUTO DIAL/STORE
11. Press HOLD
12. Move MEMORY switch on rear from PROGRAM to SET.

KX-TAW848

1. Use phone with intercom number 101. It will change the time for all phones.
2. Press PROGRAM (or PAUSE, if you don't have a PROGRAM button.)
3. Dial programming access code (probably *#1234)
4. Press NEXT (SP-PHONE, if you are not using the programming template).
5. You'll see "Date & Time Set" on your phone's display
6. Press STORE
7. Press NEXT to see hours and minutes.
8. Use your keypad to change the hour
9. Press STORE.
10. Press HOLD.
11. Press PROGRAM

KX-T123211D

1. Use phone with intercom number 101 (probably the receptionist's phone). It will change the time for all phones.
2. Move MEMORY switch on back of that phone to PROGRAM.
3. Keep handset down and press 0 on touch-tone dial.
4. Dial year with two digits (e.g. 97 for 1997).
5. Dial month with two digits (e.g. 01 for January).
6. Dial date with two digits (e.g. 03 if today is the third day of the month).
7. Dial day with one digit (1 for Monday, 2 for Tuesday, 3 for Wednesday, 4 for Thursday, 5 for Friday, 6 for Saturday, 0 for Sunday).
8. Dial hour with two digits (i.e. 01 for 1 o'clock).
9. Dial minutes with two digits (i.e. 07 for 7 minutes).
10. Dial 0 for AM, or 1 for PM
11. Press either AUTO DIAL/STORE or AUTO/MEMORY, depending on your phone.
12. Move MEMORY switch on back of phone to SET.
    

Panasonic DBS 824, 40, 72 & 96
- From the Attendant's display phone.

1. Press "On/Off"
2. Press "Prog"
3. Press " ##"
4. Press "FF1 key"
5. Dial 1#, 2#
6. Dial the time in 24 hr format.
7. Press #
8. Press "On/Off"

- From any display phone in the system.

1. Press "On/Off"
2. #98 + Password
3. Press "Prog"
4. Press " ##"
5. Press "FF1 key"
6. Dial 1#, 2#
7. Dial the time in 24 hr format.
8. Press #
9. Press "On/Off"

Panasonic DBS 576 & 576 HD
From any display phone in the system;

1. Press On/Off
2. Press "Prog"
3. Press " * * "
4. Dial the " Password"
5. Press "FF8"
6. Dial 81001
7. Dial in new time in 24 hr format.
8. Press Hold and then "On/Off"

No Problem here ya go


To change the clock to 24-hour format:
1. Press and hold the CANCEL and Delay
pads for three seconds.
2. Press the More+ or Less - pad to select
12 or 24 hour.