Canon FS11 Flash Media Camcorder - Page 4 - Answered Questions & Fixed issues

You will have to take the camera apart and get to the back side of the connector. Most likely it is directly mounted to a circuit board. I am sure it is the board that is bad and not the connector itself. There should be a replacement number on the board itself.

It is a known problem that caused by the defective CCD sensor and must be replaced.

can you do a factory reset of camera?

You may download a copy of the manual at https://docs.sony.com/release/GVD1000E.PDF

I think so

SD cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.

Go online and download the free version of Nero Burning Rom. This software will walk you through the process step by step.

Hello, Here is the website for this service manual. Free Canon Camcorder User Manuals ManualsOnline com

Buy a camera socket to USB cable. Whatever external socket is fitted to the camera can be mated with a USB plug. These are available on the net or PC store. You just plug the one to the other and play/record. Red.

Please be advised that as of March 2008, LEI no longer distributes or provides technical support forNexxtech or Centrios products. For technical support or general inquiry, please contact the following:

• The Source (Bell) Electronics Inc at (866) 515-5855 (Customer Care) or (705) 728-2262 (Head Office)

yes

Sounds like a sound decoder issue. There should have been a cd/dvd that came with your camcorder that would probably have all the tools you need for the PC. Chances are, you may have plugged in the camcorder before installing the software and Windows started loading the best drivers it could find which, more times than not, is developed by Microsoft. The fix would be installing the the software again. If you already installed it once, remove it and re-install it again. If there were any audio drivers post software installation, it could be interfering with it. Re-installing the software can overwrite the problem drivers.

What model Canon camera?

Hi,louisewil376! You can recover your lost vides from your Canon legria FS200 video camera with a Canon Photo Recovery program: http://www.canon-photo-recovery.com/ Best wishes!

Here is the manual you can see online or download. You can put into a computer using a firewire. http://www.scribd.com/doc/17476831/Cannon-MV500i-DV-Camera-Manual (IT SAY FOR A PAL - Not NTSC But everything should be the same, just a different way to record)Canon DV Cable CV-150F (4-Pin to 4-Pin) for Canon Digital Camcorders

Yes. Refer to the "Audio Dubbing" section of the manual (page 88 in my copy). If you need a manual, you may download a copy from here.

Take the battery pack out of the camcorder, attach it to the power adapter, and plug it in. Full details are on page 17 of the manual.

The ZR60 does not use a memory card. The manual covers several different models with slight differences; this is one of those differences. The ZR65 and ZR70 can use SD cards, but not the ZR60.

Please take the camcorder to your nearest service center for assistance

Call them advice 0871-909-0070