Top 20
Singer 3116 Simple Questions & Answers
Why does thread keep breaking?
You may have incorrect tension in the top needle and the wrong size needle or thread for the material you are sewing. You could have an old blunt needle too. Or old thread. Or the thread in the top does not match the bobbin thread. Hope this helps:-)
What should my tensions be set on?
Try installing a brand new needle. Generally, the factory tension setting is the midway point on the dial (however, that will need to be tweaked due to age and wear on the machine).
Machine will not zigzag
The guy is right, dust kills the moving parts. try oiling the shaft that holds the needle up about 1/2 way and then run on straight stitch with no thread to work in oil, do this several times till you feel that it runs smoothly and you have a little movement side to side as this is necessary for your zig-zag. if that does not work it may be a cam or belt in the top part that needs replacing and you will need the repair to tell you that. I asked them to give me a quote before any work was done so I knew what I was up against. I love my machine so it was worth the 200.00 to get the parts replaced. It will sew anything cause it is a older model with metal rather than plastic parts. hope this helps good luck
How old is the Mod.# 3116?
The sewing machine was first made in December 2005 I would believe as in the manual always has the date the manual was made at the bottom to go along with the machine.
http://www.searspartsdirect.com/partsdirect/user-manuals/3116-SINGER-SEWING%20MACHINE-manual
Foot pedal does not operate needle
www.
singerco.com/uploads/download/445_4830_4832.pdf
around the sewing machine needle. ... ings of the machine and foot controller ... The spool does not turn. 7. ... Note: Do not operate machine without fabric.
Not finding what you are looking for?