20 Most Recent
Akai LCT2715 27 in. LCD Television - Page 6 Questions & Answers
My Akia 27
Ur power supply board is dead.Tries Websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.
The Tv turns off automatically after a couple minutes (LCT2785TA
Sounds like the power supply is going out. Could have been shorted when there was a power surge. You using a power conditioner or surge protector???
Could be be due to overheating as well. Try to clean the outside casing and the inside using a can or compressed air. I don't think it is overheating but you never know and many home electronics turn have to avoid being damaged once they get hot enough.
Let me know any additional info and we can try to figure it out..
Thanks and hope to get you watching TV again soon!!!
Need power supply
Hi, the part number for the ps assembly is E7801-061001 , they show availability at the partstore.com
you might want to verify the number by taking the actual number off the power supply assembly directly.
I have an Akai 27
Hi btmeghan
To answer your question;
No you do not need a converter as your tv has an ATSC/NTSC tuner.
In other words your tv is digital ready.
What you need to verify after you`ve checked your antenna`s connection is go into the tuner or channel menu and make sure that the tuner is set to digital(atsc) before you do the auto scan or auto program.
Let me know how it goes.
Need customer servicenumber
t.
International Headquarters
Akai Sales Pte Ltd
8 Commonwealth Lane
The Grande Building
Singapore 149555
Tel : (65) 6476 6686
Fax : (65) 6479 9832
____________________________________
____________________________________
Akai Customer Care 24 Hours
+(91)-(22)-39898920
Mumbai
The tv consistently clicks in the back
Ur power supply board is dead.Replaced the power supply board will solved this problems.Tries Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.
RED LIGHT BLINKING AND NO RESPONSE AKAI LCT2715
This is a sign that your tv needs service.Normally it means the lamp is blown.These are expensive but easy to replace.My lamp only has 5000 hours use out the box.I had to replace it once so far.I would check your manual if you have it available.
Power blinks red wont turn on
Power supply board is dead.Tries websites shopjimmy.com,Ebay.com to buy a furbish power supply board for the replacement.
Replacment lamp for model LCT2715
There no lamp for the LCD tv.Only have LCD inverter backlight board for light for picture.This problems usally have sound,but no pictture.It that ur problems?It a long board in shape.Tries Shopjimmy.com,Ebay.com to buy refurbish board.
I have audio but no picture after a breaker
Ur LCD inverter backlight board is dead.U must replaced this board to get pictture back.Tries Shopjimy.com,Ebay.com to buy a refurbish LCD inverter backlight board for the replacement.It a long board in shape.
Repair tech says 150.00 for power supply....sounds
I checked it at encompass where I get most of my parts because they 1) have them 2) quick turnaround and most important 3) cheapest. Your tech was telling the truth. That would be the correct price for the board. Let me know if you need more help.
hardrocko
Thanks for using FixYa
Not finding what you are looking for?