Akai LCT2715 27 in. LCD Television - Answered Questions & Fixed issues

try unplugging again, wait 1 minute, then plug back in, if you get the same response, problem may be power pcb or the main pcb

sounds like power board at fault stuck in stand by look see if you can see any bulging caps

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power led, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating, to many popular brand TVs and other devices. Viewing it in "Mosaic" will make surf easy. http://electronicshelponline.blogspot.com/ Blinking codes details to many popular brand TVs are given.

Be sure AC power cord making very good connection; then,possibly capacitors in power supply PCB, also possibly Main PCB;

try unplugging your t.v for 10-20 seconds. plug it back in. if your power light continues to flash your t.v is the issue. you should be able to google your issue or check your owners manual about the problem. unplugging the t.v is the last ditch effort. Good Luck!

If I give you the values of Z3, Z4 and Z5, would you return the favor by telling me what are the values for R104, R106, R107 and C17?

I have posted this request 5 times for 2 months and no body gave me an answer. Would you be willing to work with me? E-mail me [email protected] and use MLT168A-fixya as subject
Thanks

That fan is to cool down the lamp.Sounds like the fan bearings are going

Sounds like an issue with the Tconn board.

Check the volume, check mute, check set up to ensure it isn't set to external speakers.

take it to a good repair shop as this is not usually fixed in the home=where there is smoke there could be a fire......

Change input device to some other like a DVD player and see. Look for any loose contacts in power outlet, RC jack, cable or socket. Look for any jammed buttons on remote or on control panel.Switch off TV, switch off power, remove plug and wait for 48 hours and retry.If problem persists, call in a qualified service technician.

Check this link.

Click here to download the manual

replace t-con board..

Check and replace the T'Con board of your tV.

For more details type in this site name "Electro-help" to Google search box [not in the address bar of your browser], and click search or press Enter. It is an electronic equipments service help site.

Note the position of hyphen in between words in site name. The site will appear as it is in web; subtitled as Service help to electronic home entertainment equipments.

Pull up older posts.

You can locate this site name, either at the bottom part of first search page, or at the top of second page.

Detailed descriptions are there to help you. Sometimes, clicking on advertisements by the side and bottom of each post might help you to get details about the availability of spare parts; price and more. See all details here.

I see so many here with no sound/nopicture issues:ISSUES: 1. IF sound main fuse/s are good.2. If no power or standby check main fuse, standby power supply and any signsof damage you can see---burnt parts etc.3. almost all these sets the troubleshooting involves checking voltages on the main power board to narrow down theproblem.4. Be safe and if you do not know what you are doing don't open the set.Answers to issues:1. RE:fuses---if a blown fuse is found get a good replacement(not the genericones like Radio Shack). Many fuses are special even aside from amperage--Don'tput a higher rated amperage fuse in the set for any reason.2. RE: power supply in set: if total dead aside from main fuse the set uses astandby power supply that runs 7/24 and a main supply (some are combined andsome not.Here aside from checking fuses you want to examine all the filter caps on thepower/standby to see if any are puffed up or buldged up in some fashion--Iattach a photo of a good one---top should be silver metal and PERFECTLY flatand have no brown material coming out on top or bottom.What happens in the standby area is they use caps with too low a voltage rating(saves money) which causes them to fail in a year or two---the standby runs7/24 and the heat dries out the caps and they fail.3. Trouble shooting consists of the above and then at some point you have to buyand try a board to see if it fixes it or not.4. Safety first--no TV set is worth getting injured or even killed over.If set is opened at least look for puffed up and bad caps like in thisphoto.

Akai? What is the problem.

If no owners manual GOOGLE THE MODEL NUMBER WITH manual to locate one.Programming is done usually with the remote by entering the MENU and looking for what you want to program.Let me know if more questions or information

What is the problem of your akai 55 inch dlp Tv?

power supply may not delever the proper out put.

check all the power out put supply and currect.