Top 20
Dell OptiPlex GX620 PC Desktop Questions & Answers
The computer won't let me in without a systm passwod it just started doing this
Virginia smith,
Did you forget the password? Are there others that you share this computer with? System passwords are inputted in the computer by the users. Dell does not put any passwords in computers. Dell also does not have any generic passwords that will get you into the computer. You will need to find out the password, search the internet for password recovery websites, format and reinstall Windows or click the link below and view other ways that may be helpful in recovering the password.
http://bit.ly/1SQkaX7
Thank You,
Dell-Jesse L
Rotate screen on a GX620
Display Properties should have a way to rotate the screen. You can also enable/disable the hot keys there.
Tether android usb windows xp
You want a USB connection between your computer and your phone? Why? To transfer pictures? To access the Internet through your phone?
Who's your carrier? What's the make and model of the phone?
Scrambled screen
could be any number of things... Bad cable, intermittent connection, bad video card. . . not enough info here to diagnose the problem
Optiplex gx620 2 beeps on start up, displaying 123.
If windows 7 you need to burn a repair disc & run it. Go to Maintenance, creat repair disc (use one CD & mark it with Dell gx62 on top, repair disc run first on bottom)
Restart your computer and hold down escape, F1 or F2 to get into the settings in the CMOS. You must chang the boot order of your startup. In CMOS use arrows to right to Boot to change to CD ROM then HDD so your CD will go into repair before starting the HDD. Each CMOS is different but usually you can use the f5 or f6 to change the order and f10 to exit & save the setting. Restart your computer after you put the repair disc in & that should repair your start up. I’m happy to help further over the phone at
https://www.6ya.com/expert/wynn_5ba0205233ebfc15
The monutor and keyboard not working and the code error is 2 4
Guest,
The diagnostic error code 2,4 on the Optiplex GX 620 represents a Video subsystem configuration or failure. This means that the video card in the system has gone bad. If you have an on board video card that you are using then you will need to either get the motherboard replaced or add a discrete card into one of the available MB slots. If your system currently has a discrete card installed try reseatting it in the slot. If that does not resolve the issue replace the video card.
Thank You,
Dell-Jesse L
Dell Social Media and Communities
Not finding what you are looking for?