Magic Chef CES3760 Electric Kitchen Range - Answered Questions & Fixed issues
Oven is maybe 100 degrees
It sounds as if you have a heating element that is not connected completely or has burned out. Check by looking inside and in the broiler the red glow is a good sign the dark cold one is not a good thing ! You can get a replacement from a local appliance store or on the Internet (Amazon and Google shopping).
Then it is just a matter of removing the old one and plugging in the new one. They are quite simple, but be sure you have unplugged it before you attempt to repair it.
Good luck,
Don F
9/23/2011 11:24:48 AM •
Magic Chef...
•
Answered
on Sep 23, 2011
•
75 views
A code (f1) keeps coming up on the display panel
Hello & Welcome to FixYa
F1 error means open/shorted oven temperature sensor or control board and to solve this problem the sensor needs replacement. If you want to do it yourself and wan to be sure before replacing the sensor then you can test it with a voltmeter between 1080-1120ohms....if it reads more then or less then this then it needs replacement however, if the reading is around between 1080-1120ohms then it is the control board that needs replacement. Please get back to me if you have any other questions.
Kevin
4/18/2011 7:18:10 PM •
Magic Chef...
•
Answered
on Apr 18, 2011
•
130 views
How do I turn off the pilot light in my Magic Chef 31000paw oven? I think when it stays on it is wasting gas.
I don't know. While half a century ago it was common that pilot lights would be permanently lit to provide instant lighting of oven and hobs, because they did consume a significant amount of gas they fell out of favour and spark ignition became reliable.
Amid a number of related and unrelated accidents the gas oven began to be seen as potentially dangerous and so they were fitted with a couple of safety devices so for a considerable time the pilot light has to be relit every time the oven is used and the pilot light will be switched off when the oven burners are turned off.
Thinking back a long time, the pilots of our old cooker could be turned off using a screwdriver to turn a central service valve hidden under the hob spill tray.
6/27/2020 12:41:46 AM •
Magic Chef...
•
Answered
on Jun 27, 2020
•
157 views
Electric spark will not work, burners will not light
The spark electrode sends a spark to ignite the gas in the burner assembly. If the spark electrode is defective or worn out, it might not produce a spark, or the spark might be too weak to ignite the gas. As a result, the spark electrode will make a clicking sound when the burner is turned on, but the burner won't light. If the spark electrode is defective, replace it. I’m happy to assist further over the phone at
https://www.6ya.com/expert/latoya_8ed1bf3dc615c15d
3/25/2018 5:01:51 PM •
Magic Chef...
•
Answered
on Mar 25, 2018
•
165 views
Not finding what you are looking for?