20 Most Recent Peavey Electronics Peavey Tour Tnt 115 Combo Bass Amplifier Amp - New! - Page 4 Questions & Answers

0helpful
1answer

Do do 115 Peavey amplifier have a fuse that can be blown

Yes..these amps due have fuses. Check to make sure the fuse is good, it should be close to the power cord in the back under a small, black, screw on type knob. capture1-0ghfle5x44c02sj0jxmykf2w-1-0.png You should also check the power on/of switch and power cord for issues.
1/16/2019 7:07:45 PM • Peavey Music • Answered on Jan 16, 2019
0helpful
1answer

I have a Peavey Vypyr 3 amp that has sound ONLY on the headphone. The solder joints on the jack board are good. Where should I check next?

First - Check the connections on the speaker itself - when speakers don't work. it's usually the wires from the power amp section to the speaker. If those are OK, try replacing or bypassing the headphone jack - you may have a short in the output jack. Good Luck
12/26/2018 8:47:43 PM • Peavey Music • Answered on Dec 26, 2018
0helpful
1answer

I have a peavey 684 mixing amp we have a wireless alarm system and the amp has a pulsating sound that comes from amp through the speakers how can I stop this

Sounds like your speakers may be out of phase. Reverse the connection on ONE speaker (swap the wires connected to one speaker.
12/26/2018 8:12:35 PM • Peavey Music • Answered on Dec 26, 2018
0helpful
1answer

I have a peavey Bandit 112. When I bought it the input wasn’t working which I took apart and fixed. Now when I press the button to turn on distortion it makes this loud but terrible squeal through the speaker. I’m looking for a diagram showing the wiring. Either I had reassembled it improperly or there is a short?

Check the wiring from your input jack. A short in the connection to the pc board in the amp could cause this . However, are you sure both the supersat and post volume are turned down to reasonable settings? If your distortion channel is too loud, it will feed back and squeal through the speaker.
12/26/2018 8:08:13 PM • Peavey Music • Answered on Dec 26, 2018
0helpful
2answers

Peavey max 115 makes popping sounds but no out put when bass is plugged in

Your amp has two inputs - Passive and Active. Do you get the same results plugging into either one? If only one works, then the other needs reconnection or replacement.
12/26/2018 7:46:57 PM • Peavey Music • Answered on Dec 26, 2018
0helpful
1answer

My Peavey CS 400 Stereo power amp only powers up on side 1.

Have to tried swapping the speaker cables?
12/26/2018 7:44:57 PM • Peavey Music • Answered on Dec 26, 2018
0helpful
1answer

I have peavey KB2 when I turn it on and I raise the volume, it turns off

https://r.search.yahoo.com/_ylt=Awr9DtVGSN5bJo8AUtZXNyoA;_ylu=X3oDMTByNDZ0aWFxBGNvbG8DZ3ExBHBvcwM2BHZ0aWQDBHNlYwNzcg--/RV=2/RE=1541322950/RO=10/RU=https%3a%2f%2felektrotanya.com%2fpeavey_kb2.zip%2fdownload.html/RK=2/RS=v0cqyXdd15jxSmLgvz06.J9xeZ8- This is the link to the service manual. Sounds like the power transistor is failing.
11/4/2018 1:19:47 AM • Peavey Music • Answered on Nov 04, 2018
0helpful
1answer

What year is my peavey 115bx bw bass cab

Contact Peavey Customer Service for the info. peavey com
10/30/2018 3:52:58 PM • Peavey Music • Answered on Oct 30, 2018
0helpful
1answer

Peavey blazer 158 sounds distorted after warming up

This will not be a user servicable problem. it needs to go to the repair shop.
10/30/2018 3:34:24 PM • Peavey Music • Answered on Oct 30, 2018
0helpful
1answer

Where is the battery on a peavey millenium bxp 4 string bass--there is no 9 volt access in back

Battery is in with the pots etc. Unscrew the access cover on the back. https://www.bassplayer.com/gear/peavey-millennium-4-ac-bxp
10/20/2018 1:07:58 AM • Peavey Music • Answered on Oct 20, 2018
0helpful
1answer

We have two identical peavey mixer/speaker set ups. The password is the same for both. How can we differentiate between the two so the correct units are paired?

That's a really good question Kathy! I'll call Harley this morning and ask.
9/29/2018 11:14:20 AM • Peavey Music • Answered on Sep 29, 2018
0helpful
1answer

What year is my peavey 115bx bw U.S.A.

Contact Peavey Customer Service directly for the best information peavey com
5/28/2018 12:30:02 AM • Peavey Music • Answered on May 28, 2018
0helpful
1answer

How to fix a blown channel on peavey xr 886

The most common fault is the channel;s input connector has come loose from the circuit board. Disassemble to get to that point and re-flow the soplder on all three pins and it will probably be fine. However, also inspect the connector to be sure a leg hasn't broken off, which is the second most common failure point.
5/28/2018 12:28:09 AM • Peavey Music • Answered on May 28, 2018
Not finding what you are looking for?
Peavey Electronics Peavey Tour Tnt 115 Combo Bass Amplifier Amp - New! Logo

14 questions posted

Ask a Question

Usually answered in minutes!

Top Peavey Music Experts

Brad Brown

Level 3 Expert

19187 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Ngoro

Level 3 Expert

3523 Answers

Are you a Peavey Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Peavey Music

  • Peavey Music

Most Popular Question

peavey 115s bass amplifier

  • Music
Loading...