20 Most Recent Lenovo IdeaPad S10e Netbook - Page 4 Questions & Answers

click or copy and paste the link below to your web browser. It is for the FREE AVS DVD player. This is actually a very nice player that will in fact play all music, video and picture formats. We use it to play not only rented dvd movies but downloaded movies as well. Does a great job.

http://www.download3000.com/download-avs-dvd-player-count-reg-17748.html

hi! just a tip if its a brand new one try to isolate the problem check if it can actually run by removing the battery just by the ac adapter if still doesnt work then probably you have to charge the battery first if it still doesnt charge then probably there is somethin wrong with the power board. i suggest you call your lenovo tech support for further assistance. hope this would help goodluck!

Your motherboard's BIOS may need updating.
1. Plug in AC power adaptor
2. Log in as the Administrator.
3. Download the latest XP BIOS update here.
4. Run the 14cn67ww.exe program
5. Run the flashxp.bat program and wait for the computer to restart automatically.
NOTE: Do not remove the AC adaptor or turn of the computer.

Make sure you did it correctly. Computer should be OFF when doing the one key recovery. Turn off the computer then press the small button right beside the power button. Your computer should automatically turned on and you will go straight to one key recovery software. If this will not happen, then the one key recovery is destroyed. We need to re-image your Harddrive to have that one key recovery software back to you computer. You may call Lenovo technical support department for further assistance on how you are going to send your laptop to our depot department. If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

HEy try changing the refresh rate

1. Right click on a empty space on the desktop and click on Screen Resolution. (See screenshot below)

2. Select the monitor Display you want to change the screen refresh rate for. (See screenshot below step 3)
NOTE: You will only be able to select a different display if you have more than one monitor connected.

3. Click on the Advanced settings link. (See screenshot below)

4. To Change Only the Screen Refresh Rate -
A) Click on the Monitor tab. (See screenshot below step 4C)

B) Select an available Screen refesh rate from the drop down menu.
WARNING: It is recommended to leave the Hide modes that this monitor cannot display box checked to prevent possible damage to your monitor.

C) Click on OK.
D) Go to step 6.
5. To Select from a List of All Display Modes -
A) Click on the Adapter tab, and on the List All Modes button. (See screenshot below)
B) Select the display mode with the screen resolution, color depth, and screen refresh rate that you want to use, and click on OK. (See screenshot below)
NOTE: It is recommended to use a native screen resolution with a True Color (32-bit) color depth.
C) Click on OK. (See screenshot below step 5A)
6. Click on Yes to confirm the screen refresh rate change. (See screenshot below)

7. Click on OK. (See screenshot below step 3)

HELLO,all you need to do is just to purchase an external hard-drive and the size will be increased if this is connected.
take care.

OK and are you connecting to both laptops using the same cable? Also, the image doesn't automatically output to an external source on some laptops depending the on the software. Some require that you push the 'FN' key then, say 'F7'. I had a similar problem with a Sony Viao last week, it was outputting to a projector just fine and then just stopped working. It turned out that I had reinstall some Sony software (obtained from their site) in order to get it to work.

it sounds like the Picasa prints are in HIGH quality, the others are in LOW quality, this is a setting on the printers properties. Often it is better to download these pictures and then open in a good software package then print in High quality. sometimes it is call Fast printing, etc. check your manual. Link below Also install newer drivers link below too. www.usa.canon.com/consumer/controller?act...123... -
Drivers below.. install new ones.

http://software.canon-europe.com/products/0010326.asp

see if you have connected your broadband internet cable into your computer , and go to your network connections to see if it's connected. If this doesn't help then it's probably you firewall or your anti virus program that is not allowing you to access the internet. Go to your firewall or the anti virus software and unblock the internet browser(internet explorer,firefox,etc.) you are using.

1024X576 is the maximum resolution this laptop's screen supports.
There are other netbooks that support higher resolutions.

http://www.youtube.com/results?search_query=lcd+replacement&search_type=&aq=f

Open it back up and do it properly. And make sure you used the correct replacement.

Hi There,

This is probably a motherboard issue, or drivers - try reformatting the machine (reinstalling windows and drivers) and see how it goes. If this doesnt work, its a hardware issue and the motherboard will need to be replaced.

If your computer is clearly active when you switch it on, but not displaying anything your ram is probably loose or something, it needs to be looked at by a technician.

Lenovo doesn't provide restore CDs... and the S10 don't even have CD drive. Since you install XP in new partition, probably Vista is still there? Try using Vista DVD (I assume you are using external CD for S10). Boot with Vista DVD and choose the repair option if available. If not, you may need to go to Lenovo support to get the S10 restored to original state.

contact your internet supplier how can help with a lot of the sercurity problems.also your internet setup might be wrong for wireless as it may be only set for your broadband.you can check by checking start,control panel,internet options,connections,if broadband there should be nothing in box,if is remove,next press lan settings and see if the automatic detect settings box is ticked.next close, go back to internet options in the control panel, select security,click on local intranet and put a tick in the box.(enable protection mode).click on trusted sites and tick box(enable protection sites)check the restricted site and do the same. do this before contacting supplier. then go back to start,control panel and look for sercurity center this looks like a shield,double click , open and check all sercurity features are switched on.go back to start.and try internet explorer.

I hate to be the bad bearer of news but the software that your school has loaded on your computer is setup to prevent you from visiting any sites they decide that are not school related. The only person that can give you access is your schools IT department there are no hacks and if you try to hack it the computer will lock you out! I suggest you use your home computer for Myspace, facebook and any other social sites.

You'll very rarely find Proxy/unblockers sites that are unblocked.
If you find a website that's meant to be blocked, but isn't blocked yet, it'll soon be blocked!
A few months ago, my friends found a website that'll let you go on any website, Facebook, Myspace, & Redtube, but within a week of the website being constantly used, it was eventually blocked! :(

What you need is a teacher's net account, or a tafe account.

Yes, but you cant do it.

The system administrator would have to unblock it throught the network and firewall settings of the schools main server. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

From wireless?

The wireless router signal may be blocked by some metal object like a metal file cabinet. Your laptop may be on a metal desk ..
Look around..

If you are using "G" wireless, instead of A or B or N, , then the microwave oven may be interfering whenever it is in use (like making popcorn)...

Move the wireless router and adjust the laptop position... and have peeps alert you whenever they need to use the microwave... also cordless phones (not cellphones) that use 2.4GHz signal.

Hope this helps!