20 Most Recent Kodak EasyShare Printer Dock Series 3 - Page 2 Questions & Answers

The first thing I would do is update all of your programs and firmware. You can do this by going to the Kodak site ->click here. From there follow the instructions. If you are offered an update of the firmware, do that as well. Make sure you do not interrupt the firmware update as you can cause trouble if you do. If the problem still persists try taking it to a local printer repair shop instead. It may be something simple but problems like these are too technical for unexperienced persons. You really don't want to cause more problems in the future.

make sure on your program that you are using to print your pictures, that you have the correct photo size. You could have it set for like a 4X6 for an example, where you might need a 5X7

If you have the Kodak software on CD or DVD, place the disk in the proper drive (D or E, etc.) and when the program says it is looking for that driver, point it to the location in which you put the disk.

Even though it is not the right driver for what you need to do, often times, applications must have all the drivers available, so that the installation is complete. Then they can do what you need done.

Do give that a shot, As the saying goes, "it might not help, but it couldn't hurt!"

Cheers,
-a.

Full instructions are given here:

http://selfservice.kodak.com/external/en/urg/urg_00367/GLB_en_urg_00367_manual_ATG/urg00367c1s5.html#BGBGEGJI

If clicking the above link does not work then copy and paste it into your browser address bar.

Replace the ink jet cartridges.

Hello, try this and let me know.
Remove the printer data cable & restart the PC & printer. Then fit back the data cable & turn on the printer. Hope that's start working , if no luck then Uninstall the printer driver & restart the PC & Printer both again. Now install the driver of the printer and connect it with PC ,Turn on printer & go for a test print from the printer preference. Thanks & waiting for your reply.

staples.com delivers

Hi,

the Kodak Printer dock system is used only with Camera, However you can connect the Camera on the dock and connect the Camera to the PC to work.

Regards,
Shawn


* Please rate this solution with Thumbs up and Testimony to help us improve providing support

There are 2 "BEST BUY" stores in Ottawa, and one nearby in GATINEAU.
There are 9 "STAPLES" stores in Ottawa.

Either store will have the replacement cartridge.

kindly replace the catridge.

Have a nice day and do not forget to rate please...!

It doesn't print on it because one of two things: either the paper is not the size the printer expects it to be, or the paper doesn't feed properly.

You can download the driver for win7 from the link given
http://support.en.kodak.com/app/answers/detail/a_id/16730/kw/Printer%20Dock%20Series%203

Incase you need any further assistance feel free to ask.

Hi, just a tip. Are you using the right paper type? It does work good if the paper type is not supported. Hope this helps

Kodak Help Center

yes connect the dock to the pc job done

Hi,

Please check the bellow links to have a detailed idea regarding your query:-

http://www.brighthub.com/multimedia/photography/articles/64730.aspx

http://www.ehow.com/how_6139932_fix-batteries-won_t-hold-charge.html

Please accept the solution if it's helpful. Do get back to us for any further query.

Thanks for contacting fixya.com

Check that the Paper light is not lit (from a paper error). Clear this error first by removing any paper jams, refilling the paper tray or other needed step followed by pressing the Print button.

To remove the color cartridge, open the cartridge door on the side of the unit. Push up on the green level and slide the cartridge out.

Take the new cartridge, make sure that the ribbon has no slack in it. If there is slack, push in on the cartridge spool and rotate it clockwise. (Do not turn this more than you absolutely must to take up the slack. It could reduce your number of prints.) With the label up and the arrow facing the printer dock, push the new cartridge until it clicks into place. Then press the Print button to clear the error and resume printing.

You can get your manual from Kodak as a PDF or a web page: http://www.kodak.com/global/en/service/publications/index.jhtml?pq-path=1398#printerDocks . Look for the line Printer Dock Series 3 .

I hope this helps.

Cindy Wells

Hi!

If you are having Ascending steady green lights for the center and the right light it means that the battery is charging all you need to do is to leave the camera on the dock to continue charging or maintain charge.

You may click here if you want to see more information about the light status of your machine.

Should you have any more questions just please leave a comment.

Cheers~

1. Unplug your Kodak Photo Dock's power cord. Pull the black tab on the right side of the printer down to open the ink cartridge door.
   
2. 2 Push up on the green cartridge release tab in the upper center of the ink cartridge to release the old cartridge. Pull the old ink cartridge carefully from the Photo Dock.
   
3. 3 Rotate the new ink cartridge's ribbon wheel on the side of the cartridge clockwise with your finger to remove any slack in the film. Do not rotate the wheel too much---this will damage the cartridge.
   
4. 4 Insert the new ink cartridge into the Photo Dock with ribbon film facing down until you hear the cartridge click in place. The ink cartridge will only go in one way.
   
   
   
   Do not touch the ribbon with your fingers. Handle the cartridge by its edges.
   
5. 5 Close the ink cartridge door and plug in your Kodak Photo Dock's power cord.
   

jQuery('.article ol .image').each(function(i,e){ var $this = jQuery(this); $this.find('img').error(function(){ jQuery(this).remove(); $this.remove(); }); });