20 Most Recent Kodak EasyShare Printer Dock Series 3 - Page 4 Questions & Answers

This usually represents a communication issue...
It could be between the doc and the printer (try a new USB cable) or it could be in the printer dock itself - if so, you would want to call Kodak to get a repair if they still repair them or maybe they have an upgrade path.

Take some alcohol on some cotton, (swab ok) and rub the heck out of the rollers. This should rejuvenate them enough to work, at least temporarily. If this solves the problem, then you need to have the rollers replaced. I do not know your skill level so I can't say whether you can do it yourself.

Only data and pictures come over the camera cable. The printer won't charge your camera battery.

jst have to push the stack of paper first in the beginning and then align the paper alignments with the paper edges,printer will automatically take paper in.

could not get cartridge out but did with some force now will not go back in

The paper sensor in the printer might be disturbed please check that one.

Make sure the paper doesn't have a curve in it. Also, fan the pages to make sure they aren't sticking together. Load shiny side up. Try taking about 10 sheets out

try this no promises
unplug the power cord for 5 sec
paper should feed out after resetting
DONT EVER PULL ON THE PAGE WITHOUT THE MACHINE EXITING IT FIRST. THE TABS ON THE END OF THE PAPER BREAKS OFF INSIDE THE PRINTER DOCK.
check the back of the dock for the photo to eject as well as the front.
check paper size with new one after it exits to make sure no extra pieces are stuck in printer. good luck
DONT PULL ON PAGE JAM (UNPLUG FIRST(RESETS THE PAGE OUT THE BACK/FRONT))

you can read the complete manual here

I have Lost my Printers Driver (Samsung ML-2245)

follow the link below for xp drivers
http://www.kodak.com/global/en/service/downloads/dln_ekn030179.jhtml?pq-path=6638/6639
Mark

The problem is most likely a broken plastic lever on the end of the shaft that moves the print head. The plastic lever is keyed to the shaft by a flat on the shaft. The plastic has a tendency to split at the edge of the flat, resulting in the lever slipping on the shaft. This in turn results in one side of the print head not contacting the paper with sufficient pressure. The other end of the shaft has a thick plastic sector gear which is much less likely to break.

I fixed mine by making a clamp from a metal spacer (made from split tube about 1/8 inch long) and force fitting it over the part of the plastic lever that fits on the metal shaft (on the end towards the inside of the unit). There is just enough clearance to do this without hitting the print head frame.

To remove the plastic lever, first remove two screws from back of unit, then pull up on top of unit, unplug two ribbon cables from circuit board and remove top. Then unplug two remaining ribbon cables from circuit board, and three screws holding circuit board. Lift circuit board and fan/fan-holder as one piece. Finally, disengage tab on plastic retainer on end of metal shaft, rotate tab straight up and lift shaft up and to the side (may require a little wiggling). The plastic lever slides off the metal shaft.

Kodak Fax keep saying line busy

To me it sounds like the rollers are shiney so may need cleaning

the beautiful thing about printer is that the software is preloaded in the hardware itself . simply meaning all you have to do is plug in your printer straight into the usb port of your computer. while the printer is on when that happens the computer will download the necessary driver to make sure the printer is functional! then you will also see a pop up to download their software . in that software is your salvation, for there while be a step by step tutorial on how to successfully install your new printer. Kodakcustomer service is great if you catch a hiccup just be sure to contact them and i believe they will walk you through the process. here is a bing search to get you in the right direction! http://www.bing.com/search?q=kocak+printer+technical+support&form=U280DF&pc=U280

Take the cartridge out and dab on wet paper towel and clean the print head with alcohol using a q-tip.Be sure to unplug the power first.