20 Most Recent Kodak EasyShare Printer Dock Series 3 - Page 3 Questions & Answers

Same place as the normal printing paper. Just check the front of the paper. Please follow the link below to learn and see for yourself where and how to put the photo paper.
http://selfservice.kodak.com/external/en/urg/urg_00367/GLB_en_urg_00367_manual_ATG/urg00367c1s6.html

Hello,

power off the printer and unplug the printer completely. Try to hold it upside down and gently shake it so that the paper inside it is removed. do not drag the paper in other for it not to get torn.

After, the paper has been removed power on the printer and check the ink cartridge to ensure there is ink inside it and it is well place and fix in its place. Now try to print again.

Take care.

mcdevito75 here, I would figure yes, any re-chargeable batteries, but check with your local Radio Shack or Staples or refer to your manual, Generally you just have to watch the size of the re-chargeable batteries used, and of course a cheaper battery may not lasty as long as the manufacturers suggested battery type or brand if any.

Hi


Thanks for using FixYa. To start with turn printer off and unplug the printer completely (power, USB, etc). Try to hold it upside down and gently shake it so that if there is any paper inside it’s removed. If still it’s not resolved then clean the print head. To clean the print head take a hot water towel with the printer unplugged and the cartridges out, clean it till the time you see there is no ink residue on the towel. If still it’s not resolved then you can use WD40 to remove them. Please do accept the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

sounds like you need to go to the printer page, go to set up and do a printing test. this will clean the heads and set the printing format.
lastly, kodak's web site might have a trouble shooting information guide to help resolve the issues.

Hello there This may work for you, it has worked for many here I given this advice so gave it a try it could work for you. Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.

First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.

If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.
And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.

Also clean The purge unit, called a spittoon assembly in an HP, Lexmark, Caonon and other inkjet printers, is where the print head assembly parks when not in use, also its other job is to clean and make sure the print head is clean and open for printing.

That is where you'll find the print head assembly parked on top of it.
It also has an electrical pump to milk the print heads and test for ink flow.

So clean all under where the heads are parked and on IP6600D models you can take out the heads just by clipping them out, and then clean well.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

THROW IT IN THE TRASH AND BUY A HP PRINTER
KODAK DOESN''T OFFER ANY SUPPORT. PURE JUNK

Yeah You may call kodak and send it for repair 1 800 235 6325., Unfortunately all the printer dock series is already discontinue., Or may be you can try to purchase a All In One printer of kodak that you can used to print your picture using your camera.

Open the kodak all in one home center on your desktop and click on [?] on top most right hand side. choose maintenance under general links and choose printhead cleaning. if this does not solve the issue, call kodak @ 1800 421 6699 and they will replace the printhead for you free of cost.

Paper jams are reported under two conditions.

1) Paper reaches a sensor and never leaves it.

2) Paper does not reach the sensor in the time allotted.

A simple test is to put a mark on the next page that should be pulled from the paper tray. If the paper is pulled from the tray, you will find it inside the printer. If the paper fails to feed, it will be sitting in the tray where you marked it.

Don

did a quick search for you on ebay came up with this result have a look click here

Instead of restarting, try this:
1. Start
2. Run
3. Type this in the box: services.msc
4. Hit ENTER
5. Scroll down to PRINT SPOOLER
6. Right-click on it and choose RESTART

this will clear out your print queue without having to restart. Good luck!!


Hi this is the more effective way to refresh the print queue.

Manually Stop and Restart the Spooler Service



1. Click Start, click Run, type command, and then click OK to display the command.com window.
2. Type net stop spooler, then press .
3. Type sc config spooler depend= RPCSS start= Auto, then press . The spaces between = and RPCSS and = and Auto are important. Without these spaces, the command fails.
Type net start spooler, then press



NARENDER KUMAR RANA
[email protected]
[email protected]
[email protected]

Here are the steps:

1.Remove the power cable from the printer.
2.Remove the paper tray from the printer.

3.Verify that the paper you're using has KODAK XTRALIFE

Paper
4. Insert the paper tray into the printer.
5. Open the color cartridge door, then remove the color

cartridge.
6.Install the color cartridge, and verify that it is fully

engaged.
7.Close the color cartridge door.
8.Connect the power cable to the printer.
9.Wait for the printer to initialize
10. Make a print.

If issue persist, call 1.800.235.6325 for repair.

Thanks,

Neerak21

For that problem kindly try doing the ff:

* Re-seat the inks both color and black then try printing
* Re-seat the Printhead of the printer then print again
* if problem still persist call 1800 421 6699 and the technical rep will replace the printhead

Hope this will help

Thanks
Byron

Refer to www.kodak.com/go/manuals on how to take cartridges out. if that does not solve the issue, call Kodak @ 1800 421 6699 and they will resolve the issue.