Kodak EasyShare Printer Dock Series 3 - Answered Questions & Fixed issues
Kodak easy share printer dock 3
sounds like its only receiving half the data. try these step... uninstall printer from your device... reinstall printer to device... if youre using a smartphone or tablet, switch to a pc... press and hold the cancel button on the printer... turn it off for 60 seconds then power it... run the nozzle cleaner function, then try again
It only prints half of the picture. How do you
Hi
The printer driver is corrupted and needs to repair it by adding new printer with the same printer name and set it as default. Then delete the old printer icon. If prints the test page, then it solves your problem.
If still not working, uninstall and reinstall the printer driver which will refresh the printer driver itself. then set up the printer again.
Regards.
Printer Dock 3 Print Problems
Unfortunately you may have to force feed the paper through as the printer is trying to pull it, it works but you have to stop pushing once it takes the paper!
Printing Issue
It has dust or built-up goo on the feed switch. Try some canned air
Picture prints with red tint
Sounds like the colour cartridge is either empty or you have blocked cyan and yellow printheads. If so, refer to the user manual for instructions on how to clean the printheads. This is a common problem on any inkjet printer which isn't used regularly and is caused by ink drying in the nozzles.
Need to download manual for
The manual for a Kodak EasyShare printer dock series 3 can be found here: http://resources.kodak.com/support/pdf/en/manuals/urg00367/PD3_GLB_en.pdf
Alanddotsmitheasyshare printer series 3 is
The first thing I would do is update all of your programs and firmware. You can do this by going to the Kodak site ->click
here. From there follow the instructions. If you are offered an update of the firmware, do that as well. Make sure you do not interrupt the firmware update as you can cause trouble if you do. If the problem still persists try taking it to a local printer repair shop instead. It may be something simple but problems like these are too technical for
unexperienced persons. You really don't want to cause more problems in the future.
Printouts are missing top/bottom half
make sure on your program that you are using to print your pictures, that you have the correct photo size. You could have it set for like a 4X6 for an example, where you might need a 5X7
Got a new Vista computer and cannot get Kodak
If you have the Kodak software on CD or DVD, place the disk in the proper drive (D or E, etc.) and when the program says it is looking for that driver, point it to the location in which you put the disk.
Even though it is not the right driver for what you need to do, often times, applications must have all the drivers available, so that the installation is complete. Then they can do what you need done.
Do give that a shot, As the saying goes, "it might not help, but it couldn't hurt!"
Cheers,
-a.
How do i change the ink on my printer?
Full instructions are given here:
http://selfservice.kodak.com/external/en/urg/urg_00367/GLB_en_urg_00367_manual_ATG/urg00367c1s5.html#BGBGEGJI
If clicking the above link does not work then copy and paste it into your browser address bar.
My Kodak Easy Share Printer Dock series 3 only
Hello, try this and let me know.
Remove the printer data cable & restart the PC & printer. Then fit back the data cable & turn on the printer. Hope that's start working , if no luck then Uninstall the printer driver & restart the PC & Printer both again. Now install the driver of the printer and connect it with PC ,Turn on printer & go for a test print from the printer preference. Thanks & waiting for your reply.
Kodak printer dock series3 can't be used with a
Hi,
the Kodak Printer dock system is used only with Camera, However you can connect the Camera on the dock and connect the Camera to the PC to work.
Regards,
Shawn
* Please rate this solution with Thumbs up and Testimony to help us improve providing support
Not finding what you are looking for?
