Braun Paximat Multimag 250 Af I Slide Projector With 85Mm F/2.8 Mc Lens - Answered Questions & Fixed issues


Try Googling (braun)(SC663)(manual) without parens.

Braun Office... | Answered on Mar 26, 2018 | 114 views


My guess is the sleeve bearings in the fan motor need oil. I use teflon based oil.

Braun Office... | Answered on Jan 05, 2015 | 479 views


Try Bulbman.com or Bulbs.com or the retail chain called "Batteries PLUS Bulbs".
If they don't stock them, they should be able to point you toward someone who does. Good Luck !! Jim

Braun Office... | Answered on Dec 04, 2014 | 93 views


Search for the 3-alpha ANSI code that is on the lamp online. If you can't read it, or don't have the user guide to identify the correct lamp, try: www.bulbs.com or www.bulbman.com
Both are good sources for all kinds of lamps, and they usually have reference guides that will allow you to identify the exact lamp you need for your projector! Good Luck !!

Braun Office... | Answered on Mar 06, 2012 | 91 views


You rotate the front rim of the lens.

Braun Office... | Answered on Sep 15, 2011 | 172 views


Gepe Universal 50 Straight tray should work. It might even use the Braun CS Compact trays but the Gepe are more common.

Braun Office... | Answered on Sep 15, 2011 | 174 views


You should take the old lamp to a camera store and see if they can find a substitute.

Braun Office... | Answered on Sep 15, 2011 | 214 views


What is the description of the lamp? Braun's current catalog numbers for lamps are 80231 for the 150W 24V and 80232 for the 250W 24V. If you need a different lamp you should bring the old lamp to a camera store and let them look it up from the bulb manufacturers.

Braun Office... | Answered on Sep 15, 2011 | 232 views


If you are in the USA send it to Braun service at:
HP Marketing Corp. PO Box 715 16 Chapin Rd. Unit 908 Pine Brook, NJ 07058 800-735-4373
Otherwise check the factory web site for Braun service in your area. www.braunphototechnik.com

Braun Office... | Answered on Sep 15, 2011 | 299 views


Try checking with www.bulbman.com They have an amazing assortment of lamps for projectors!

Braun Office... | Answered on Nov 12, 2014 | 886 views


Hi

Most probably the projector has a broken solenoid "link" or the nylon link. This "Link" connects the slide change solenoid and the slide change mechanism. Over time this part becomes brittle & cracks, rendering the slide change non-functional. Also you have jammed the slide change mechanism. Turn the projector off. Remove the tray using the emergency release slot in the center hub of the projector. Turn the projector on and cycle it a few times in reverse, then in forward. That usually clears a mechanism jam.

Check the bellow link to read the article to have a detailed idea related to your issue:-

http://books.google.co.in/books?id=dRJ02gF1PwIC&pg=PA202&lpg=PA202&dq=slide+projector+won't+move+reverse&source=bl&ots=iWEMpMGvJn&sig=pKwkK8dsUYoNUgKJM_i_aLImtfs&hl=en&ei=FuotTYvaCsixrAeAw-zKCg&sa=X&oi=book_result&ct=result&resnum=4&ved=0CDEQ6AEwAw#v=onepage&q&f=false

Please get back to us if you have further query else please accept the suggestion.

Braun Office... | Answered on Jan 12, 2011 | 147 views


Which NovaScan product do you have? The one that I know is the Novoscan 4000 which is listed for XP or Vista (32- or 64-bit). Since the drivers do change over time, sometimes the old software doesn't work directly.

The software is here: http://www.braun-phototechnik.de/en/downloads/Software-Treiber/~did.8~nm.15~nc.21/BRAUN-NOVOSCAN.html . Get the correct version for your computer - 32-bit or 64-bit. Unfortunately, I don't see any OS version labels here.

Unfortunately, Microsoft has no information on the compatibility of the Braun NovoScan products. http://www.microsoft.com/windows/compatibility/windows-7/en-us/Search.aspx?l=en-us&type=Hardware&s=Braun%20NovoScan .

If you continue to have problems, there are two options to try. 1) Install with the compatibility mode. This may work. 2) Install to a virtual computer with an OS that you know is compatible (or a second computer with that OS).

For item 1). Download the software or use the CD. Right click on the exe file and choose Properties. Click on the Compatibility Tab and set it to run as compatible with an older version of Windows. Save the setting by clicking OK. Next right click again on the exe file and choose Run as Administrator.

For option 2) If you have Win7 Pro or Ultimate there is a free option. Download and install Microsoft's Virtual PC and then the XP mode. Otherwise you need a virtual computer program and a licensed version of an older version of XP. Install the scanner inside that "computer". The only issue will be that files can't be shared between the two "machines" directly. You will need to save files to external media (or optical media) to share them. Also peripherals (like printers) can only be installed to one "machine" at a time.

I hope this helps.

Cindy Wells
(I found some other sites that claimed to have Novoscan drivers but the trustworthiness of those sites are unclear to me. They were found by Google.)

Braun Office... | Answered on Dec 12, 2010 | 1,360 views


You have to check a sensor that hold a big cover, under the feed table. I just closed that cover tightly

Office Equipment... | Answered 34 minutes ago | 160 views


The actual process of screen printing isn't technically difficult. The most difficult part is creating your print designs and acquiring all the equipment that you need to do screen printing.

I first started screen printing a few years ago as I wanted to make t-shirts for selling on Etsy. I watched a ton of YouTube videos on what to do and what equipment I needed to get started. After that, I searched the internet to find a reasonably priced supplier of screen printing consumables.

Once I had all my equipment, screen printing actually became quite easy. However, if you're not really sure where to start, I would definitely recommend watching some YouTube videos about screen printing before you invest in the equipment as it can cost quite a lot to get all of the supplies. What I will say is that screen printing is really fun and you should definitely try it if you haven't before.

Office Equipment... | Answered Yesterday | 14 views


Here you go


Installation and Operation Manual, Model 8144-EE - Orolia

www.orolia.com > documents > attachment

PDF Jan 26, 2007 - MODEL 8144-EE CLOCK SELECTOR/. DISTRIBUTION AMPLIFIER. INSTALLATION AND. OPERATION MANUAL. 95 Methodist Hill Drive.

Instruction Manual, Model 8144-RE ' Orolia

www.orolia.com > documents > instruction-manual-model-8144-re
Instruction Manual, Model 8144-RE Clock Selector/Distribution Amplifier, rev A.

Instruction Manual, Model 8144-DD

spectracom.com > instruction-manual-model-8144-dd > attachment

PDF MODEL 8144-DD. Clock Selector/Distribution Amplifier. Instruction Manual. SPECTRACOM CORPORATION. 95 Methodist Hill Drive, Suite 500. Rochester, NY ...

Instruction Manual, Model 8144-RD

spectracom.com > instruction-manual-model-8144-rd > attachment

PDF MODEL 8144-RD. CLOCK SELECTOR/DISTRIBUTION AMPLIFIER. INSTRUCTION MANUAL. SPECTRACOM CORPORATION. 95 Methodist Hill Drive, Suite ...

Black & Decker Trimmer 8144 User Guide ' ManualsOnline.com

lawnandgarden.manualsonline.com > ... > Black & Decker Trimmer
Garden product manuals and free pdf instructions. Find the user manual you need for your lawn and garden product and more at ManualsOnline.

AS-8144B/AS-8441B Manual - Aten

assets.aten.com > product > manual > as8144b_8441b_080519PDF
Read this manual thoroughly and follow the installation procedures carefully to ... The AS-8144B and AS-8441B are automatic, Bitronics, first-come-first-served, ...

I-8144 User's Manual - ICP DAS USA's I

www.icpdas-usa.com > documents > I-8144 User's Manual

PDF

Office Equipment... | Answered Yesterday | 12 views


https://www.cargurus.com/Cars/Discussion-m7_ds493022

Office Equipment... | Answered 2 days ago | 13 views


https://www.netgearr.support/orbi-setup/ support and phone number. Check how to setup Orbi. Call technical support phone number at +1-844-456-4180 .

Office Equipment... | Answered 3 days ago | 15 views


https://www.copytechnet.com/forums/konica-minolta/100443-how-reset-admin-password-bizhub-c224.html

Quoting from link:
" Re: How to reset admin password on bizhub C224
Once in service mode do a STOP, 0, C
You should then have an option to reset admin password

The manual has these steps to reset."

Office Equipment... | Answered 3 days ago | 18 views

Not finding what you are looking for?
Braun Paximat Multimag 250 Af I Slide Projector With 85Mm F/2.8 Mc Lens Logo

Popular Tags

6 questions posted

Ask a Question

Usually answered in minutes!

Top Braun Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6073 Answers

jasbo
jasbo

Level 3 Expert

2239 Answers

Are you a Braun Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...