20 Most Recent Sharp R-510HW Microwave Oven - Page 2 Questions & Answers

Do you have a device inputting into the port you are selecting ?Try connecting the VGA port on TV to your PC's out put where the monitor connects, Boot the PC after selecting VGA as the input on the TV. Your PC's desktop should be displayed on the TV's screen

Sharp microwave is a very good unit. If you have done same repair twice before, i suggest replace board complete with display next time as there could very possibly be a set of defective components on the old board that is causing this display problem. Have done this repair before and noted how thin the tracks are also. Honestly go for new board if you can.

you must carefully and read your instr. manual if some material inside the microwave can be produce fire. Otherwise the microwave can be old and the electronic component deterioring and cause exploding.Some time the material inside from the microwaves, is corroded, and the irradiation can be produce Fire. Tes the indication given.God bless you

the electronic circuit are corroded timer does not function / the IC program was lost of memory such as function / if you have some old look a like Sharp Model you may transfer control panel.

The service manual is at our site here.

In most cases, disassembly and cleaning is all that's required.


If you would like to have us do this repair for you, we do that for $39.95 nationwide.

We are happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Your door is misaligned dont use it by holding it Ionce you tighten the door correctly then adjust the door switch where the door latches and make click sound Thanks Please rate me

Hi,
Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips

heatman101 ;
'[]
';

Hi,
Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips

heatman101 -==-
=-][][

what?