2002 Suzuki VS 1400 Intruder "choke knob" Questions

...choke knob at the outside of the choke mounting bracket is loose. Turn the knob to tighten the friction on the choke cable just enough to hold the choke in position until you push it in. Vulcans are ...

...choke" knob merely dumps more gas into the carb. If the bike starts normally with the knob pulled out, you do not have a problem. On a cold/cool day, pull the knob out and start the bike. If it idles ...

Choke knob is very hard to pull? What could be wrong and whats needed to fix? There is a tension adjusting bezel at the base of the choke knob. Loosen it to free up the choke action. It is a black ...

...marauder Can't find the choke Your choke is a pull out knob located under your tank; it is not a part of the carb. You might be able to trace the cable from the carb to the pull out

choke cable just behind the knob that you pull out, you'll see a round knurled knob. If you tighten this knob, it increases the tension on the cable. However, if someone has put a lubricant on the

...choke knob to the frame? 'year make model' is useful in questions like this!! It it is attached to the frame, it must be on a bracket and the bracket must have screws. All the bikes I owned had the ...

choke knob doesn't stay open on 2001 H-D Superglide fxd the choke knob doesnt stay open. there should be a 17mm brass nut behind the knob. loosen it and tighten the black plastic nut outside by ...

...choke" knob and take it out of it's slot in the bracket. Twist and pull the carb out of the intake manifold bringing the "choke cable" with it. Once out, use a 14 mm open end wrench to unscrew the ...

...knob won't stay out to Choke the carb. It's hard to start holding the knob out and turning the key and throttle at the sametime Your choke cable needs some oil and check to see if someone put a big ...

choke knob will not stay out HI, The choke knob cannot stay out,because there is a spring which is part of this knob and then back to the starting position.....