Question about Maxtor Computers & Internet
...cs enabled mean thank you CS means Cable Select .Parallel data cable have two conectors.If you set jumper set on CS ,in this way ,example,you have two HDD when you plug parallel data cable in middle ...
not detect Set the unit to CS, then go into your Bios and enable the drive
...at motherbord .also check that your ide cable is working properly. set jumper to cable select or CS also you have to enable drive as active for it to boot to it. you can only have one active drive ...
CS Enabled: Cable select, the computer desides wich harddisk is master and wich one is slave The 4th is cap limit: windows cannot run on harddisks that are to big, like 300gb, so putting jumper on cap
...CS), Master (MA), and Slave (SL). If your hard drive is strapped as master you must connect it to the connector at the end of the cable. ( If there is a second device on the cable it must be strapped ...
805 questions posted
Usually answered in minutes!
421 Questions
140 Questions
