...Stihl 025 chain saw? Hi First remove the cover,air filter and the carburator.Then remove the gas tank cap and the fuel filter from inside of gas tank,at the end of fuel line.Take off the fuel line ...
...Stihl saw I have does not run. I cleaned the air filter, cleaned and checked the gap on the sparkplug and added gas and oil. On full choke the saw will start and run but when I try to take it off on ...
Question about Stihl Garden
...stihl chainsaw that's probably 10 yrs old. Will start ok but the chain won't move when given gas. It revs but won't move. I guess the first thing to look at is chain free to move ?, do this with saw ...
Question about Stihl Garden
Stihl pole saw trimmer is not pulling gas into the cylinder from the carburetor Will only start when gas is poured into intake could be a carb issue, a split in a fuel line, damaged intake boot or ...
STIHL 029 CHAIN SAW BLOWS GAS BACK OUT OF THE .....Can't imagine why shaking the saw around would keep it running. Chain saw won't start Feb 8, 2012 homelite xl chainsaw Sep 4, 2009 Husqvarna chainsaw
Question about Stihl Garden
stihl ht75 pole saw with a new piston, rings, and housing, all OEM. It won't start now. I confirmed the orientation of the piston, it gets, gas (fresh) and has spark. It gets gas and sparks, but won't
Stihl blower will not start check your abc's of engines first (intake,fuel) substitute a tiny amount of raw gas in carb intake to see if it springs to life ! (compression) -pull rope slowly to "feel" ...
gas spraying out when trying to start These saws have a vent tube located under the rear cover. If its missing, it will splash out when you try to start it. George
saw will start but dies when rev Check the pick up fuel line in the gas tank. If there is a fuel filter at the end of the line,remove and clean or replace. Use a small fexible wire to hook line and ...
Question about Stihl Garden
Stihl pole saw and after starting it, when I go to lift it up to cut it dies You have a problem with the fuel line or fuel filter running to the tank. Filter may have come off or line has a hole in it
78 questions posted
Usually answered in minutes!
529 Questions
514 Questions
473 Questions
353 Questions
122 Questions