Question about Sharp Office Equipment & Supplies
...paper in tray 3 CAUSE: This error message indicates the paper present sensor flag in one of the trays does not detect paper in the tray. This could be caused by one of the following: A broken sensor ...
...paper tray or all paper trays that you have. To remove the a tray first you should pull it towards you the most you can than by pulling towards you and in the same time you should lift it up.So again ...
Question about Sharp Office Equipment & Supplies
the trays back in the machine and put the paper back in the tray moving the slides right up against the paper and close the door. It should work normally from now on, if not try a reboot one more time
if removing the tray is causing the paper to tear or if it is torn before removing the tray Chances are the paper is getting torn as you remove the tray. I suspect you need to replace you feed rollers
paper tray my printer needs more paper but I cannot remove the tray.There is no paper caught up in the machine Remove the paper jam clear cover on the back side of the printer. Press the paper ...
Paper Output Tray is closed / Paper jam Summary If the Paper Output Tray is closed, open it. The machine resumes printing. If opening the Paper Output Tray does not resolve the problem, or if the tray
Question about Sharp Office Equipment & Supplies
...paper tray setting Remove the packing material from the printer. Remove the all orange tape from the outside of the printer. Remove orange tape from paper tray 2. Remove the orange packing tape from ...
Question about Dell Office Equipment & Supplies
...paper in Tray ... The printer is asking to load legal paper in Tray 1 but legal paper does not fit in Tray 1. How can I redirect it to mfp? Paper up tp 14" long will fit in the paper tray. Remove the ...
Question about Sharp Office Equipment & Supplies
paper tray back into my HP LaserJet P3015 printer I removed the paper tray to remove a paper jam. Now I can't get the paper tray beck in Make sure that you did not lower the duplex tray. Look into the
Question about Sharp Office Equipment & Supplies
removing the paper tray). 2.Disconnect the power from the printer dock for 5 seconds, then reconnect the power. Carefully remove the paper if it does not automatically eject. IMPORTANT:Check the paper
476 questions posted
Usually answered in minutes!
1,105 Questions
603 Questions
557 Questions
331 Questions
183 Questions