...lower control arm and tighten to 21-29 Nm (15-21 lb-ft). NOTE: Front suspension lower arms must be in the horizontal or curb position (vehicle on the ground) when tightening the front stabilizer bar ...
...lower control arm bushings in the girlfriends. They are a mitsu only part and go for about 50 each. Solution to this problem: You need to change "Rear Lower Control Arm Bushings" . Mitsubishi parts ...
changing the oil on my 04 envoy i noticed what looked to be grease from passenger side cv boot splashed around the struts and lower control arm. i was unable to find any cuts or rips in the boots from
...control wiring harness connector, battery wiring harness connector and connector bracket to engine mounting insulator. Remove the harness bracket. Remove the upper timing belt cover. Remove the water ...
...Lower Control Arm Bushing was extremely bad. We also had the Front and Rear Motor Mounts replaced to elimante a secondary knocking issue we experienced while accelerating. The overall effect was a ...
...lower control arms. Changing this may alter toe in, so that should be re-set. I had the same problem on my 04 tj, if you have a lift or larger tires it happens frequently, they call it the "death ...
changing the ac clutch and taking out the pully 04/11/09 2000 Chevy Cavalier Air Conditioning Clutch replacement Just finished it. I am an novice. Use safety glasses, Dust and dirt will get in you ...
...Lower Control arm By Removeing Lower Ball Joint AND OUTER TIE ROD.There are are 3 Nuts On top where the Coil Spring Seats Remove Them, Remove Assembly The Same as A STRUT ASSEMBLY, YOU Must USE ...
...sound front passenger side when i hit some bumps in the road. I changed lower control arm,strut and spring still making noise Did you check the stabilizer links and the sway bar mounting
1,144 questions posted
Usually answered in minutes!
1,658 Questions
839 Questions
768 Questions
633 Questions
207 Questions