20 Most Recent
2007 Jeep Liberty Sport Questions & Answers
RB4 Calibration / Sensors Menu Question
Hi Chris
I have run across the problem with the display showing that you are going backwards on units I work on my bench.As long as you are getting the distance pulses and the nav functions are operating properly the should be no problems.You reinstall the 2060 ver and see if it reverts back to the way it was.Then reinstall the 2070 ver again.The main changes that were madewere to the update speed for the GPS functions.I do have a service manual,but cannot release it to anyone.From what i understand I am the only one that is Factory authorized to repair the RB4 units in the USA.
Feel free to msg me about any other questions you have about the unit
Yes theCAN BUS could cause a problem.
The 07 chrysler's use the highspeed CAN C in some of the app's in the vehicle.But from what I understand they are only using 125hz can BUS speed(which some consider low speed CAN) But as you mentioned the radio is talking on the BUS so it must also have J1850 communication.The RB4 does not have CAN built into the unit.
12/26/2021 6:03:58 PM •
2007 Jeep...
•
Answered
on Dec 26, 2021
What does $07e8 code mean?
wow, seen where, radio, nav, or cluster? or?
why not say where your finger is pointing.(or eyes gander)
means someone used the passenger ejection seat.
(due to nagging mother-in-law)
over 7000 pages in the FSM, takes long time to scan this.
is this some autel scan tool bull
where it gives an odd code
then you look it up in there silly manual
and find what it really means?
i see one hit, in google for P0300 is true code
why not use a real scan tool and stop fooling about.
or ask any shop in town, no dealer needed. 99% of time.
11/22/2017 7:23:19 PM •
2007 Jeep...
•
Answered
on Nov 22, 2017
2007 Jeep Liberty - Not Starting: Our jeep will
one click is , lamp test, mode, see operators guide on how to start your car, it tells all this lamp stuff.
Does it crank
if a/t car , you cant push start it so
automatic trans, cars, tell what you have for drivetrain
first learn 2 word
cranks ok
but does not start
or will not crank
mine push starts and gravity hill starts, but is and M./t stick shifted
jeep.
i can start my car 3 ways. see?
done so vast time.
tell what happens as you turn the key
head lamps are bright right>
i turn the key the starter is silent.
and i try to crank in neutral as the operators guide directs you and it does what?
the A/t CAR WILL CRANK IN PARK OR NEUTRAL.
TRY THAT.
3/21/2017 11:25:14 PM •
2007 Jeep...
•
Answered
on Mar 21, 2017
I have looked in the user manual and can not find the fuse (or fuses) that control the light for the console. Which fuse number is it?
learn to test them all, using a meter? or look at them?
or post the exact light dead, you did not.
the cab of the car and dash, etc is ****-a-block full of lamps.
must we guess, ?
post a photo of one lamp dead, and BINGO, 1000s words in 1nanosecond, is this too hard?
yes we can but , no we cant with out photos or using real names of a lamp.
console, do you mean the shift console, or the console box light.
Illum.? those lamps on the shifter run off of cab dimmable park circuity, turn on park and they all glow,.
if only one dimmable lamp fails of the 10 or more in the cab.
then its burned out, or the connector to it is rusty.
10/1/2016 2:48:18 PM •
2007 Jeep...
•
Answered
on Oct 01, 2016
Why won't it accelerate past 10 mph?
which engine? is traNS AUTOMATIC OR STICk?IS TRANS STUCK IN 1ST GEAR?>hot or cold? or both (engine temp)is transmission slipping? (if stick clutch slip)(eg: engine rpm races, and speed dont increase) called slip.is it slipping?or is engine misfiring? (tune up, times skipped?)or is engine bogging, (feels like dragging 10,000 pounds)?the engine light means, (get car serviced now)or if savvy and a DIY person, it means SCAN it now.easy huh>?its trying to talk to you, so listen to it and scan it.then post the DTC errors. keep in mind we are deaf and blind here. so miss 99% of all key facts, and evidence on car. that your living mechanic sees , feels and hears.,so dont expect magic here, there will never be that, here.
9/8/2015 1:47:40 PM •
2007 Jeep...
•
Answered
on Sep 08, 2015
Esp bas light abs
get the brakes serviced first.
neither of those work with bad brakes.
check fuses 1st.
then scan it, scan the ABS. see DTC codes,
if it says a sensor is dead. well it is..
each code has different meanings and further tests.
but we check that the brakes work.first.
imagine if you will, trying to fix cruise control with a dead engine.
see?
5/23/2015 4:07:27 PM •
2007 Jeep...
•
Answered
on May 23, 2015
Driver door will not open from inside
Could be a simple fix. Take off the door card (the inside trim bit of the door. You will probably find the link rod or cable from the interior handle to the lock mechanism has popped off. Some are held on with a clip, so if that is missing, you may need a new clip.
3/8/2015 5:38:38 PM •
2007 Jeep...
•
Answered
on Mar 08, 2015
Not finding what you are looking for?