...change lower ball joints part of lower arm assembly only. Installation Inspect lower ball joint boots and seals for damage and replace if required. Lower ball joint and seal is part of front ...
...sound front passenger side when i hit some bumps in the road. I changed lower control arm,strut and spring still making noise Did you check the stabilizer links and the sway bar mounting
change front shocks on a '04 Ford 150 4wd.Whats the procedure and tools i would need.Thank you You Must Put it UP On Jack Stands And Take Out the LOWER BOLT From Shock FIRST ,Drop Lower Control arm By
...change "Rear Lower Control Arm Bushings" . Mitsubishi parts ONLY. +- $ 50,00 each. CELP. I have a 2004 Endeavor Limited. I have this same problem. My '04 Endeavor has 77,000 miles on it and has been ...
...lower control arm. i was unable to find any cuts or rips in the boots from just a quick look but how difficult would it be to replace it. Unfortunately, the CV joint boot is about the only thing that ...
change timing belt galant 04 mivec 2.4 Timing belt ?B? (balancer belt) and related components?2004?2005 Galant and 2004?2005 Lancer 2.4L engine Disconnect the negative battery cable. Remove the engine
...Lower Control Arm Bushing was extremely bad. We also had the Front and Rear Motor Mounts replaced to elimante a secondary knocking issue we experienced while accelerating. The overall effect was a ...
...control arm and a notch in the Outer clutch plate to hold the A/C outer clutch plate from turning as I turned and removed the nut. IMPORTANT! This nut that you are removing is threaded on to the A/C ...
...lower control arms. Changing this may alter toe in, so that should be re-set. I had the same problem on my 04 tj, if you have a lift or larger tires it happens frequently, they call it the "death ...
1,144 questions posted
Usually answered in minutes!
1,658 Questions
839 Questions
768 Questions
633 Questions
207 Questions