1993 Ford Ranger SuperCab "directional lights working trailer" Questions

...lights stop working when tow vehicle lights are turned on I baught an old used boat and trailer. The trailer is a bit rusted but otherwise very sound. I ran new trailer light wires replaced all bulbs ...

...working. The night running lights on the trailer still work just not the others. Everyone I've talked to said to check the ground wires. They are probably the most perfect connections I have on ...

...lights on trailer both work just not the running lights. Unless I'm mistaken, there is no fuse dedicated to the trailer lights - they're wired directly to the matching truck lights - the running ...

...lights? I bought a brand new trailer and the dome light doesn't work when plugged into my truck. It works fine when plugged directly into a battery. The running lights, turn indicators and ...

...lights and directional lights are both the same filament. Wen the brakes are applied, both lights are activated. When a direction light is turned on, it simply flashes the brake light filament. The ...

...lights on trailer will not work with 5 pin trailer adapter. 5 pin trailer connections here went out when Noah died. They were standardised at 7 pin for a long time then for a short time there was 7 + ...

...trailer lights, specifically the directionals? I past vehicles if you did not upgrade the flasher, the directionals would blink faster that normal. most times you have to replace with heavy duty ...

...lights in trailer do not work ALWAYS go directly to the ground connection to your pull vehicle. Remove and clean these ground connections between the pull vehicle and trailer. Been the problem 99% of ...

...trailer lights dont work. the lights over the license plate dont work. could there be a fuse that is blown, does the plate lights need to work for the trailer lights work, and, if so, where is the ...

...lights not working at all, on a 2003 Toyota Prado (Petrol) I have been trying to get trailer lights to work properly, but have isolated all 7 wires, as the indicators stopped working, but the ...