1996 Nissan Maxima "woodruff key" Questions

woodruff key when removing the crankshaft damper. Fig. 4: The crankshaft damper can sometimes be pulled from the shaft by hand Fig. 5: A puller may be required to remove the crankshaft damper NOTE: If

Woodruff key removal 1995 honda acord woodruff key removal from crankshaft use a small chisel and a small ball pein hammer (engineers hammer). place the chisel on the end of the key angled to push the

...woodruff key in the crankshaft without causing damage My woodruff key sheared and I have the replacement but I cannot remove the broken key from the crank so I can install the new one Carefully, with ...

...Woodruff key (Part #56) Part #STD580025 The manufacturer no longer makes this part, and there's no substitute part ...

...Woodruff Key Removal The crankshaft pulley has sheared the woodruff key. I have had a new keyway cut in the pulley. The old key is not yet removed. It appears to be used half for the crankshaft ...

woodruff key for the harmonic balancer? hi this depends on what harmonic balancer you are inquiring about, normal balancers do have a woodruff key,but the pulley type harmonic balancer only bolts to a

woodruff key I need to know what size the woodruff key on the crankshaft of a 1989 mazda b2200 ? With dial calipers, my closest estimate for the key size on a b2200 1987 to 199? is 3/4 inch in length,

...woodruff key. This caused a miss-alignment which altered the correct timing, which in turn was causing the knocking, reduced MPG's, hesitation upon acceleration, and a slow return to idle RPM's. If ...

the balancer with a woodruff key that keeps it locked in place. The woodruff key resembles a half moon shape. You will have to remove the balancer to see what kind of damage there is and go from there

...woodruff key pressed into the end of the crankshaft. Turn the gear in the proper direction, one side is probably marked front. Line up the rectangular groove and push it a just a bit. Then gently tap ...