...Four-wheel drive (4WD) control module (For 4WD control module installation, refer to 4WD control module in this section.) Mode select switch (MSS) Gearmotor encoder assembly Automatic locking hubs ...
...procedure. yes as long as it is in 2 wheel drive and not locked in four wheel drive pull the front 2 tires on as you normally would Yes - as long as the dolly is rated for over 6100 lbs.. And should ...
Question about Ford Cars & Trucks
...lock in both front wheel hubs and now have 4 wheel drive. Flip off switch inside and no longer in 4 wheel drive. Checked all fuses I really don't know quite how to tell you this. Everything seems to ...
Question about Cars & Trucks
...Four-Wheel Drive Systems The electronic-shift four-wheel drive system consists of the following components: Transfer case (For transfer case repair procedures, refer to Section 308-07B ). Four wheel ...
...procedure for engaging the four wheel drive, can someone give me the heads up, please, James A. Smith First thing to do is engage the lock out hubs on the front axels if it has them, they should say ...
Question about Nissan Altima
...lock position. This condition may occur in either direction (full left or full right turn). This condition may be caused by the tire momentarily contacting the stabilizer bar. DIAGNOSIS: If the ...
...procedure, check the rubber or universal joint connector between steering column and the steering gear. If it's worn it will cause looseness and there's your problem. Otherwise, there is a threaded ...
...four wheel drive High and Low range, (Transmission) I had this problem recently. I do not think that I followed the 4wd/low shift procedure (Put foot on brake, Shift to Neutral, turn selector). It ...
...lock (PVH) solenoid and vacuum lines The mechanical-shift four wheel drive (4WD) system consists of the following components: Transfer case (For transfer case repair procedures, refer to Section ...
PROCEDURE TO CORRECT THE PROBLEM. THE 4-WHEEL HIGH GEAR LIGHTS CONTINUED TO FALSH. I COULD TELL THAT THE 4-WHEEL DRIVE WAS NOT ACTIVE BY THE WAY THE TRUCK STEERED. IT WAS IN 2 WHEEL DRIVE. I DROVE THE
542 questions posted
Usually answered in minutes!
1,587 Questions
1,450 Questions
1,306 Questions
569 Questions
534 Questions
