1998 Nissan Altima "change pin" Questions

...hand, out of sequence. The engine would'nt start or turn over but it made a funny sound. I changed the sequence of the pins. The engine turned over but won't start. Did I do any ...

...change.. If your not really handy or experienced - I would recommend a pro or friend do it.. Good luck ;o) Yes you most likely would have to do that. There should be a little pin on the switch that ...

...change the ecu its possible that the ecu is coded to the keys and maybe the injectors.also if the engine including loom went in but u still using the previous ecu the pin config on the loom plug is ...

popping noise in front driver side changed brake pads,caliper caliper bracket pins and clips.help changed all and still have popping noise you can also fill it in the brake padel when you apply the ...

...the slide pins. Because of the age of your vehicle, it's always a good idea to have the brake fluid changed (This means that your mechanic should bleed the brake system by opening the bleed screw on ...

rear brake light wont light. checked fuse. changed bulb. Try checking the adjustment for the brake switch its near the top of the pedel up under the dash there will be an adjuster nut that can be ...

...issues locating the inhibitor relay on my '96 Nissan Altima. Anyone know where to find it so i can change the relay? Should be in the relay box behind drivers side headlight. Nissan part number

...change the gears is when i stick a pin into a small hole located on the top left of the console. Either your brake light fuse, brake switch or shift lock solenoid is bad. Any one of those being bad ...

Had a flat tire on my GMC Sonoma. Changed the Had a flat tire on my GMC Sonoma, left rear. Changed the flat then took it to a shop to repair tire. Got it back and notice the left rear tire wobbling. ...

...change a breke booster? ok disconnect your battery then you remove the lines from the master cylinder then you remove the two mounting bolts from the brake booster then you go in the car remove the ...