1991 Chevrolet C1500 "camber front" Questions

front? could be bent subframe, lower arm or steering knuckle. The total toe reading is low as well. Should be at 0.13 +/- 0.03. Also as emissionwiz stated, caster is low. . Note L/SAI and Cross SAI on

.... This is causing a speed wobble. please advise s to how to solve problem DIY. sorry no diy, truck needs front end alignment the camber is way off thats why you are only wearing the inside of the ...

...gear box ,idler arm and pitman arm replaced with a alinement. goes alll over the road, worse at higher speeds, front end is all tight Sounds like the camber is off. Have the alignment

...ford excursion what causes camber ? where can I get a manual to fix this and or other front steering problems camber is a front end alignment adjustment must have a front end machine to adjust ...

...camber on the front passenger side wheel No, you don't need 15 degrees of negative camber. Most typical specs for camber on the front of a car are between 0.0' and ~ -2.5'. Note: Cars with -2.0+ ...

...Front Camber is too agressive, is there anyway to prevent excessive tire wear that is due to negative camber being too large? The front tires are wearing on the inside shoulder due to negative camber ...

...camber on the front suspension of a 1989 nissan d21 pickup truck http://www.bing.com/videos/search?q=adjust+the+toe+camber+on+the+front+suspension+of+a+1989+nissan+d21+pickup&FORM=HDRSC3 ...

outer 2" of front tires outer 2" of front tires wearing fast CAMBER PROBLEM... IT IS CALLED POSITIVE CAMBER.. BRING IT TO SHOP FOR CAMBER CORRECTION.

...camber BUT is at the Front and Rear edges of the front wheels. (Think of your own feet. toes in, / \. Toes out, \ /). That hit you mentioned to the left side of the car might also have bent something ...

front camber -0.5 & -0.5; camber 1.7 & 1.7; toe 0.00 & 0.00; total toe 0.01; steer ahead 0.00. Rear camber -2.1 & -1.4; toe 0.11 & 0.08 total toe 0.19; thrust angle 0.02 If the car