1997 Mitsubishi Eclipse "reset codes tcm" Questions

...codes. If trouble code resets, replace TCM. 4.Check and repair wiring harness between transaxle relay connector and solenoid and pressure switch assembly connector. If wiring harness is okay, check ...

...codes, then your TCM and ECM are in good shape, and if you're lucky then it'll be something simple like a sensor, or solenoid. Try cleaning it first with seafoam transtune in the fluid for a week. If ...

...disconnecting the battery for 15 minutes then reconnect it and drive about 25 miles so everything

Codes are stored in the TCM. SO WHAT'S THE SOLUTION?
MyAirbags has a reset solution for 04-07 VW Jetta 1.8L/2.0L https://www.myairbags.com/product/vw-jetta-2004-2007-1-8l2-0l-ecu-ecm-pcm-repair/ as

...TCM for more codes to resolve the problem. P0700 DODGE Description The transaxle Control Module (TCM) monitors the malfunction of sensors and actuators relating to transaxle control. When the TCM ...

...light comes on error code P165 TCM system reset has come up, what does this mean P0165 is O2 Sensor Circuit Slow Response (Bank 2 Sensor 3). Don't know what you mean by "TCM system reset has come

...codes yourself by disconnecting the battery for 10 minutes. You will need to reset the security system after the disconnection. ...

codes don't always reset themselves after a repair is made. DTC P0700 - Transmission Control System Malfunction Circuit Description for Allison Automatic Transmission This diagnostic trouble code

...kept it in memory you need a scanner which can go in to the tcm and check the code if worst unplug battery lets it reset for 15 mins and retry if it lights up again you need to check the code from ...

...TCM was disconnected or it has been replaced bar room answer. your battery was dead, or removed, or is was bad. battery is old and cold starts, allowed it to drop battery voltage way too low, (weak ...