20 Most Recent
1995 Mitsubishi Eclipse Questions & Answers
95 eclipse ECM fuse blown how do I replace it
Hello Sarah, check your owners manual to locate the fuse/relay location (if there is one) and its rating. The problem must be isolated as the fuse is designed to protect components in the system so if there is a short or a electrical problem that is causing a fuse to blow..this problem must be located or you will just continue to blow fuses.
Alternator belt
FTO? I forgot that those even existed.
which engine do you have?
- 4G93 1.8L SOHC 16v I4
- 6A12 2.0L DOHC 24v V6
- 6A12 2.0L DOHC 24v MIVEC V6
Redline upon startup
If your check engine light is flashing DO NOT even try to run the engine. Major damage could happen if it is flashing. Get it towed to a mechanic. I wish you the best of luck and hope you have not ruined it.
Hi, my 1995 Galant wont shift to overdrive. I
Boy O Boy, Don't throw that old trans away, It is most likely OK. Did you change the filter and fluid. A bad speed sensor or a bad torque converter lock-up solenoid will result in a loss of overdrive function. Perform an OBDII scan of the stored faults And look for Speed sensor and lock-up solenoid faults. Watch out for those shops, they will skin you.
How to get lifters to quit chattering
Incorrect grade of oil can cause this, however, at high mileage, like many other components, the ticking occurs due to wear & tear. The best is to replace the lifters
1995 Mitsubishi eclipse starts runs 10 seconds then stalls
Is the Security light on? Could be too many things to list here. Step 1. Scan for codes. If no codes, see if it's losing spark or fuel or both. If it's losing fuel, it might be the pump or relay or wiring or computer. If no spark, it could be cam sensor or computer. Security light on means the key or anti-theft module has a problem. If equipped. Kind of what it sounds like, the computer shuts off the spark when the theft module does not detect the proper key chip.
Not finding what you are looking for?