2007 Chevrolet Avalanche LTZ "chevy loosing power taking" Questions

loosing power i have a 2003 chevy impala 3.8 engine. It looses power when im going up hills. prime example i was traveling on i24 headed from clarksville to nashville i was traveling at 80 miles per ...

power and it takes a couple of starts to get the engine going. I've talked to several chevy mechanics and they can't figure out the problem. I have replaced with fuel filter twice. Please help

...CHEVY 454 GOES WELL TIL IT HEATS UP. THEN STARTS TO BACK FIRE AN LOOSES POWER AT 3000 RPM WHAT IS WRONG WITH IT? Take it to an exhaust shop to check out the catalytic converter. May not be it, but it ...

chevy rearend? You need a 250lb torque electric impact gun to ever think about getting the pinion nut loose. It really doesn't take that much power, but the bigger the better. You also need to fix the

...power, and won't go very fast, and you have your foot to the floor, this is the likely cause. The car may be covered by a Chevy extended warranty for this known defect. The warranty is 10 years 100K ...

...chevy express 2500 Pulled fuse box but cannot pinpoint problem connect a 10 amp charger to the cars battery cables when off of the battery.. take the battery completelty loose..using this charger to ...

chevy 1500 pickup ok well first take the 2 screws inside the handle off then the corner piece where the mirror would be start prying on the bottom corners in between the plastic an the steel go upward

...Chevy Trailblazer LS. Recently it has been making a strange sound when you start it up and turn the wheel in any direction when driving. It sounds like the belt or something is rubbing against ...

...chevy blazer runs fine for a little then starts loosingpower it has power for a little bit and then it looses it and the tach jumps up and down anyone know what it could be this sounds like a fuel ...

...chevy S-10 King cab,2.8 it starts n runs but loose power going up hill,wont pull an doesent wont to take gas.plus it backfires. I;ve changed Moduale, Distribuator cap and Rotary button. I would have ...