2007 Chevrolet Avalanche LTZ "rear end noise" Questions

...rear end noise that get louder turning to the right and goes away turning to left. Also upon excelatation noise not so loud coasting noise get louder have checked rear brakes and rear axle bearings ...

...rear end or do you have cv joints going into the rear end? this is important to know. With out actually being there to check it out, I would say you need to check the yoke, the universal or cv joint ...

...rear-end.. My 03' avalanche was making the same huming sound. After checking everything that could possibly be making this noise from tires to wheel bearings to brake shoes draging and four different ...

...rear end bangs on take-off. When jacked up you can turn the tire approx 1/3 way around before the drive shaft moves. It has posi and the fluid was changed with the coorect fluid from GM. Noise was ...

rear end gears must be removed, new bearings should be installed on all parts, 4 total, the metal from the failed pinion bearing will ruin the rest of the bearings, might as well only do it once, also

it makes a craking noise everytime i accelerate it sounds like its coming from the rear end differential TSB ON PROPELLER SHAFT YOKE AT TRANS. OR TRANSFER CASE

...Rear Leaf Spring Slap or Clunk Noise (Replace Spring Inserts) - (Jul 23, 2007) Subject:Rear Leaf Spring Slap or Clunk Noise (Replace Spring Inserts) Models:1999-2008 Chevrolet Silverado 1500/2500 ...

...rear-end or the front of truck. starts to make noise when I get to 20 mph or higher. stops when I'm back below 20 mph Look for something caught in the drive shaft - also check rear bearings and drive ...

rear end on the quadrasteer is making alot of noise and feels like it is binding when i first start to backup. I'm going to open the rear end to inspect it. I can't find a repair manual fo the

rear end noise on a 2003 dodge ram 2500 RWD truck makes noise while driving but not while stopped with rear end jacked up and wheels spun by hand Most likely a bearing in rear end. Pinion or wheel ...