2008 Ford F 250 Super Duty 4WD "pull oil pan 4" Questions

Ad

...Pull the dipstick out wipe it clean then check the oil after the oil is warm and the car sits for about 4 minutes not running.Gets all the oil to the pan.Check then if its not to the line on the warm ...

Ad

Question about Ford F-250

1 Answer

...pull down the oil pan without pulling the motor. If your truck is a 4 cyl, then there is no way around pulling the motor to reseal the oil pan. if it is a 6 cyl then the frt diff will have to be ...

Ad

Question about Ford F-250

2 Answers

...oil. Which one do I pull. The front one or the rear one? This is an 03 Mountaineer? What engine? It has two plugs on the oil pan? They did this on some of the the old 5.0 engines. front is to the oil ...

...oil pan on a 1996 GMC Jimmy Hi: Rather than pulling the motor I removed the front diff and then resealed my oil pan... a lot easier than pulling the motor... If it is 4 wheel drive then the motor has ...

Question about Ford F-250

1 Answer

...oil pan. I have a 2001 silverado 2500 HD and need to work on the oil pan. My question is, "Do i need to lift the engine to get the pan removed?" There is part of the truck frame that runs under the ...

Pull down oil pan.4) Remove old gasket.5) Clean both mating surfaces.6) Take the opportunity to replace any gearbox oil filter within.7) Refit new gasket with silicone sealant on both sides

pull down oil pan on 2003 chevy trailblazer Guessing you have the 4.2 liter engine and are trying to figure out how to "release" the oil pan from the engine block as it is on there even though all the

...oil pump needs to be replace and head gaskets need to be change also . To I need to pull my notor out . You shouldn't have to for head gaskets, makes it easier but not necessary. For oil pan, you may ...

Question about Ford F-250

1 Answer

...for easier access. 5> Put in 4 quarts of 5W30 or 10 W 40 through the oil cap on the valve cover. 6> Wait a few minutes and pull the car back a few feet. Check for leaks and you should be good to

oil pressure after engine warms up your can either pull the engine to do it, or if you can get or have enough clearnce to drain the oil and remove the oil pan you can do it with the engine still in ,i

Not finding what you are looking for?
Cars & Trucks Logo

516 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...