Juki DDL-8700 "clock time" Questions

...9 years old. Just stopped, new batteries not correct fault. Love clock and want it working please. We have done nothing at all to it except look at the time. Your clock is not a sewing

clock goes off sewing is good for about 10-15 seconds, then stops and clocks again. Juki HZL F300 Exceed Sewing Machine at Ken's Sewing ... www.kenssewingcenter.com/juki-hzl-f300-exceed-sewing-machine

...top of the machine. it's the most left hole. to change it back to factury setting, turn it counter-clock-wise as far as it will go. then turn it 6 times clock-wise. too bad, that the manual doesn't ...

...be showing on the bottom in which you will have to adjust by loosening the little screw on the spring of the bobbincase. Best to do very slight adjustments here. Like a clock, one - o'clock at a

...using every thread guide make sure the bobbin is inserted correctly into the bobbin case--counter-clock-wise if these suggestions don't help then the machine could have a timing ...

...clock, you should be turning the screw no more than 10-15 minutes. Make a single adjustment at a time, place the bobbin back into the case and stitch. ...

...foot is in the up position make sure the bobbin is turned correctly in the bobbin case,, counter clock-side also could be a timing ...

...thread guide take the bobbin out of the bobbin case and reinsert it, making it sure it counter clock wise in the bobbin case also could be a timing problem These may help: What to Do If Your ...

...time, mark where on the clock you have moved it to Put back in machine and sew, check stitches Take out again and follow above instructions do again. Most times it only takes a couple of tries to get ...

...time and keep pressing while turning on the machine until the service screen come up. Select the "i" icon and then the icon that has a picture with the clock and a question mark. That will show you ...