Kyocera FS-3900DN Laser Printer "creasing paper fuser" Questions

...creasing the paper, usually a couple of inches in from the right margin. This happens for the first few pages after the printer has been idle for a while. This problem usually occurs due to moisture ...

...paper with too much moisture content, drys out and goes wavy when it runs threw the fuser roller at rear (180 deg), otherwise it will be the fuser rollers themselves causing your problem, which means ...

...paper keep creasing up The paper creases up when printed from the cassette tray or from the mp tray. can I get a little more info what do you mean creases is it jamming or just coming out crinkled if ...

paper into the fuser. They sometimes get toner build up that the paper catches on. If the paper does not go straight and flat into the fuser you will get a very tight crease or z-fold in the paper due

...paper before it goes into the hot part. Press you start button and try to catch the paper before it get to the fuser the hot part. So you can see if the paper is creasing before the fuser the hot ...

Paper comes out creased If the printed image is smudged, as well as creased, you might have a torn Fuser fixing film. You will need a technician to fix that. If it is just a crease, just check that 1.

paper exits it is actually slightly raised so the print is smearing Check to make certain that the fuser unit is not damaged. Often a crease or dimple is caused by foreign material on the fuser roller

creasing paper on exit but fuser "looks" ok check the paper tray paer guides to make ure the paper is sitting square in the tray if the guides are out of place adjust so that the paper cant shift from

...fuser in a laser printer. Have a look at the leading edge of the paper as it exits the printer for a nick or mark that may give a clue where to start looking. If there is a fold or crumple line down ...

...creasing paper Hi, on printing the pages are creasing at the bottom only. Any help welcome. Thank you First, check the quality of the paper you are using. The fuser will heat the paper, it tends to ...