Dyson DC16 Root 6 Bagless Handheld Cyclonic Vacuum "40 motor working" Questions

...Motor was seized. Probably from lack of use combined with the moisture involved with such a device. I loosened the motor with a pliers, gave it a small shot of wd-40, and off we go. Works

...of the hair off the roller but, it still wouldn't spin. I disassembled the brush roller and motor. I sprayed a small amount of wd-40 on the gear end of the motor and now everything works as

...motor. Unlike lower output, heavy duty motrs from 40 years ago, BRUSHES CAN SELDOM BE REPLACED ON THEIR OWN. IF YOU CAN ACTUALLY GET ALL THE WAY IN AND OUT OF THIS VAC , THEN YOU ARE CAPABLE OF THE ...

...motor oil will work. After putting on the WD-40, I spun the roller end around a few times and the WD-40 lubricated the bearings and Voila! The roller end spun freely!! I put the black caps back onto ...

...40 on the shaft and wiggle and move from side to side. (I slipped a small drill bit between the motor fan (motor cooling fan) to prevent the shaft from turning when you remove the nut.) Be sure you ...

...motor down, remember some things. 1. Mark both end caps, so they go back on to the same ends they came off. 2. Sometimes, you get DC motors. This STILL applies to them, with the exception they have ...

...motor ,he took out the screws and foung that the plastic gear was jammed so he put WD 40 on it and pulled it back in place and now it works great.Everything inside is plastic,so check this ...

...40 to change these filters. I would not recommend trying to get to it yourself but if you are handy, take apart the lower housing and you will find it behind the fan motor leading into the cannister ...

...motor and the white wheel where the cord is, you should see two brass wheels that turn into each other in order to operate the cord rewinder. Spray a small amount WD-40 between the two brass wheels. ...

...40 loses suction Hello, this is Ava with Think Crucial. If the dust cup is too full, there is no space for the dirt to go when you are vacuuming. To fix this, remove the dust cup and empty the it. If ...