Samsung LE32R41BD 32 in. HD-Ready LCD Television "tune remote" Questions

...remote works. It seems to be the same problem everyone else is experiencing. I also have the same tv in the lounge but the signal is recieved via a digibox so only had to re-tune that. Funnily enough ...

there is a easier way to check your remote. Open your radio on AM frequencies, you don't need to be tuned just noise is perfect, then bring your remote near the antenna and press some button. You will

...LE26R8 purchased in 2007 has the built in FREEVIEW tuner. Many thanks, Peter smart Yes it does. If you look on your remote there should be a dtv/atv button and a dtv menu button to tune it into

...tune in my le32r7 tv..I find that I can't select the tuning option as the cursor keeps by passing it..What can TI do? Just got through to Samsung support. Turns out the freeview card had frozen and ...

tune to any other station. OK on analogue. Cannot get any response to any reset mode in digital so cannot retune You'll need to go into service mode and do a factory reset.To enter service mode you'll

...tune" procedure If yes and channels were found; have you tried "source input" button o your remote? Have you tried "menu/support self diagnosis or contact samsung? If all else fails contact samsung ...

...tune in my Samsung DTV channels Hi, my girlfriend has moved T.V to flat and we put the standard TV aerial into the back of T.V. Terrestrial reception is pretty poor on channels, and when I press DTV ...

...channel icon is greyed out and you cannot tune the channels press the TV/DTV button on the remote control unit so that the icon is visible again and not greyed out. This will allow you to tune the

...and press the left arrow key on the remote (or press the enter/ok button) the tv will reset itself and turn off. turn the tv back on & it'll re tune all its channels. DTV should be working

Samsung LCD -no picture/sound from any input source-Cable,DVD,PS3 Samsung LCD running for couple years with no problem - cable,DVD,PS3. Turned it on today and cannot get a signal from any input. I can