Hotpoint First Edition FEW12 Front Load Washer "wm52" Questions

Hotpoint First Edition 1000 WM52 it does the wash, but is not turning and jus makes a click nose, can you help please? I had same problem. Had to replace brushes on motor. Easy enough job to do ...

locate brushes on a wm52 hotpoint hello there are 2 black clips attach to the motor either just slide them out and slide new one in good luck shaun

my hotpoint wm52 fills slowly on the rinse but the main wash and fabric conditioner cycle is fine, any ideas what could be wrong? faulty cold water valve replace

After successfully reeplacing Heating element in hotpoint first edition1000 WM52 on filling it the water is all running out from underneath.Can you help me? There is a seal for heater that most likely

my hotpoint wm52 won't start ,its completely dead no lights ,have checked sockets,plugsand fuse all ok ,have also changed interlocking system still nothing main timer is blown along the door lock ...

no power to my hotpoint wm52 washer Check the wall socket with another electric gadget. Check your washer plug fuse. Finally open up the rear (after taking the washer power cord off the wall of course

Hotpoint First Edition 1000 WM52 the turner thing for different washes is very hard to turn now, the machine seems to struggle. Hi. It sounds like the timer is stiff, remove top cover, and spray WD40 ...

need to change push button on off switch for a hotpoint wm52 need to change push button on off switch for a hot point wm 52 just need to check which wires go where there should be a wiring diagram ...

stopping mid cycle, not taking softner, doing a please can somebody help my hotpoint first edition wm52 is stopping mid cycle, not taking softner, doing a hot wash on all programmes and i have to stop

location of filter in wm52 does not rince Hi. Remove rear cover of washer, locate and remove large black hose fastened to drum, remove and clean filter inside hose. Please rate my solution. Thanks.