quot; unplug the power cord hold buttons '#' and '6' as you plug it back on while still holding, power on the printer after a few seconds, it will show semi NVM reset or
...quot;. What do i do? [email protected] Hard reset the printer: 1) unplug the power cord 2) hold buttons '#' and '6' as you plug it back on 3) while still holding, ...
Question about HP LaserJet Office Equipment & Supplies
...quot;, but that didn't help. Any suggestions? HELLO First of all, Isolate to a wall outlet and not a strip. Remove the cartridges. Remove the power plug and then reconnect. Reinstal the ...
...quot; plz help me You need to install the drivers before installing the printer. This is not a plug and play device. If you bough the printer new, it came with a CD. Insert it into your CD/DVD drive ...
Question about HP LaserJet Office Equipment & Supplies
...quot; as not authentic HP cartridge when it is. try to reinstall black cartridge ,and clean contact as the follow picture if still the problem try the next step 1. Unplug the power cable from printer ...
Question about HP LaserJet Office Equipment & Supplies
Setup, 2, and then 6 to print a self-test report. I got a a "cartridge error" message. Then I removed both cartridges and cleaned them. Still getting the error message. This is caused by the
Question about HP LaserJet Office Equipment & Supplies
...quot; appears in status window. Memory was cleared by power up and pressing setup button. Do cartridges need to be cleaned? You might have to check whether the Lexmark printer is Online. For this you ...
quot; item in the setup menu ? Usually, faxes are temporarily sent to the printer's memory when one of the cartridges' ink level is not substantial for printing. You are advised to replace the
...Setup menu no reference to faxes in memory. I have a Lexmark 6650. When the fax wa sent it said "printing" but nothing came out Usually, faxes are temporarily sent to the printer's ...
quot; etc when powering up) and no change. Thanks Jag Photo tray problem ' Lift the output tray up and verify that the photo tray ' is pushed in until it stops, then lower output all the '
28 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions