Dyson DC59 Animal Bagless Cordless Stick Vacuum "remove wand vacuum" Questions

...How do I remove the wand cap? http://www.dyson.com/support/dc17/dc17-animal/diagnosis-root-menu/dc17filterwashvid/flo-dc17-wand-suction/flo-dc17-remove-the-wand-from-hose - This should help

...WAND AND SLIDE HOSE UP AND DOWN, AS FOR THE CAP, TAKE A PAIR OF PLIARS, GRAB HOLD OF END OF CAP AND PULL CAP FULLY OUT OF THE HANDLE,AT THIS POINT CHECK THE SPRING OR REMOVE THE SPRING IF YOU PREFER ...

...remove the wand from the holster. Verify that the wand "cup" is indeed in the higher position. Do this by pushing on the bottom of the cup with your finger. It should easily depress. Remove the wand ...

...remove wand from handle Hi Connie, it's Jack at Dyson. If you're having difficulty removing the wand from the machine, this may be because the hose was twisted when the wand was last replaced on the ...

...wand. remove the wand part by pressing the gray button near the bottom of the wand. remove canister. if your looking at the front of the vacuum where the canister was near wher the clear bin of the ...

...Remove the wand from the telescoping pole, and look at the two holes in the wand where the electrical connection is made between the wand and the pole. You may see corrosion, which will cause the ...

...remove the wand from the holster. Verify that the wand "cup" is indeed in the higher position. Do this by pushing on the bottom of the cup with your finger. It should easily depress. Remove the wand ...

...remove the wand/hose from the machine as if you were going to use it to vacuum the stairs. Switch the machine on and test the suction at the top of the wand handle with your hand. If the suction from ...

...vacuum works but when you pull out the wand, nothing happens. i cleaned out the wand and still nothing. you need to check the clean out ports 1 directly under the hose on the bottom and the other ...