Simplicity Serge Pro SW432 Mechanical Sewing Machine "tension knob machine put" Questions

...tension dials on 4. Also make sure when you thread your machine your presser foot lever is up to allow you to get your threads through your tension discs properly. To test the tension (usually set at ...

tension knob was removed trying to put it together Oops. Take a look at this page, scroll about half way down it should give you an idea of the tension knob assembly. http://autonopedia.org/crafts-and

...tension knob and up on the left. This puts the thread in the tension discs. Next slip the thread into the take up lever. (Bring the thread to the top of the lever and back towards the machine. Then ...

...spacer can struck the tosser ,put washer back to back cone retainer next spring next cover with number indicating tensioner of thread next the knob.Put the tread between two cuve for enough

...tension adjust knob on the Michley LSS 202 Mini 2 Speed Sewing Machine? i unscrewed it too much trying to adjust the tension I don't have one of these machines, but will try to answer anyway. You're ...

tension mechanism my granddaughter took the tension knob off of my machine, which made all the parts inside it, come out. I need to know how to put it back together What make and model sewing machine?

...tension knob. Tighten until you have contact with discs. (Or re-set to number you think you used last.) Re-thread the machine, both top and bottom. When you pull both threads, together, one thru ...

BROTHER SEWING MACHINE PUT BACK ON THE DIAL KNOB TENTION Youtube.com has great instructions on replacing tension knobs. You can watch a video for free. Good luck.

tension knobs too on my overlocker Put the loopers on 4 and the needles on 3. Usually the tensions are all set at the mid-range to start. From that point, you can adjust the tensions as you test serge

...tension knob to 0 tension, and raise the presser foot. Spread the tension discs a part with a small screwdriver and blow some canned or compressed air through the discs.You should see some thread or ...