Question about Singer Sewing Machines
the feed dogs seem to have dropped. they are below the plate . whats the probelm? it knots up and does not go forward . knots up in the bobin area, have to pick thread out with tweezers Please go to ...
Threads knotted under the plate in the feed dogs. Removed the plate, cleared the knot, all five threads are ready to come back up through the feed dogs, but don't know which ones go where. The machine
...thru the procedure ex press button press scissors etc This operation requires pushing the feed dog button down and when I had finished it would not engage the feed dogs and there was no ...
Question about Sewing Machines
My material doesnt want to move forwird only when i pull it very hard what can be the problem Ok, the feed dogs have been lowered and you must fine the lever that raises the feed dogs. There should ...
Question about Sewing Machines
...I do to fix it? I've tried rethreading the machine, also unplugging and replugging it in. The feed dog are probably dropped lower than the the throat plate. Most machines have a setting for darning ...
...the tension up top was too tight - thread wouldn't pull smoothly. I found adjusting the feed dog lever slightly helped the stitches a lot, even though the needle tension up top is no better. ...
Problem with feed dogs and thread catching My Janome 525s was sewing fine and then I tried the overedge foot for the first time and all the threads got caught in the feed dogs and it wouldn't work
feader dogs will not move material. thread knots up Thread knots because the material is not feeding. Sounds like the machine has not been oil or serviced in some time and the old oil is turned into a
Question about Sewing Machines
The buttonhole attachment sews in one place, making a big knot of thread. sounds like the feed dogs are not engaging the fabric. check that the feed dogs are up and check the stitch length. Also, if ...
...and needle thread must match. Thread and needle size suitable for the material being sewn. Feed dogs underneath need cleaning. Thread tangled underneath feed plate. Needle too old or bent, or ...
110 questions posted
Usually answered in minutes!
45 Questions
40 Questions
21 Questions
